Ok basically, I’ve migrated my OS from a hard drive to SSD successfully a few times before using Minitool partition wizard and figured this would be just the same. Do the migration, go to boot up after removing the old Hard Drive and putting in the new SSD (after checking it had successfully transferred all the data) and this is what I get. It won’t boot to Safe mode either, so there’s that.
The SSD is a refurbed Kingston 120GB I bought earlier today, it reads when not operating as the OS drive (when I use my old Hard drive as the C: and the SSD as D: )
https://youtu.be/T2nLKxoSXuM Here's a video of the boot process, screen just goes black after I stopped recording, I found the weird visual tear right at the end of the video pretty worrying not sure if it's actually related to the problem though.
The SSD is a refurbed Kingston 120GB I bought earlier today, it reads when not operating as the OS drive (when I use my old Hard drive as the C: and the SSD as D: )
https://youtu.be/T2nLKxoSXuM Here's a video of the boot process, screen just goes black after I stopped recording, I found the weird visual tear right at the end of the video pretty worrying not sure if it's actually related to the problem though.