I'm having a really annoying problem with a new pc that I built recently
so after wiring it all up, and having it start up, it seemed fine. The only problem I had was that it had power, but then nothing shows up on the screen, it just comes up as no signal
my parts are:
MSI B350M Mortar
Ryzen 3 2200G (currently using AMD boot kit with their A8 cpu)
Some random DDR4 patriot ram 2x4gb
350W PSU from Seasonic
and just some random HDD to boot from
So what I've done so far to try and fix this is first I tried taking it off of a tv screen and using a pc monitor
when that didn't work I tried going from HDMI to DVI
then I tried putting the two ram stick in the other ports
then I tried the AMD boot kit with their A8 CPU
then I tried just 1 ram slot as well as moving them around and swapping between them
then I tried a discrete GPU
then I just tried leaving it for like 10-15 minutes to try and boot
then removing that silver battery thing which I think was the CMOS and putting it back in
I'm genuinely running out of idea's I've checked every wire, I've tried 3 different PSU's, I've tried DVI, HDMI and DisplayPort on two different screens and a TV
The error lights on the motherboard do one of 3 things
either it one by one lights up CPU, then DRAM, then VGA and BOOT at the same time
it repeats that over and over
or it gets stuck on ram (that doesn't happen if I move them around a bit and try a single stick)
or eventually it will just light up VGA and BOOT and stay there
that's basically the whole story, why can't I get this thing working, it only powers then the screen simply doesn't detect a signal
I just want to know how I can get this thing to boot in some way, any suggestions would be appreciated
so after wiring it all up, and having it start up, it seemed fine. The only problem I had was that it had power, but then nothing shows up on the screen, it just comes up as no signal
my parts are:
MSI B350M Mortar
Ryzen 3 2200G (currently using AMD boot kit with their A8 cpu)
Some random DDR4 patriot ram 2x4gb
350W PSU from Seasonic
and just some random HDD to boot from
So what I've done so far to try and fix this is first I tried taking it off of a tv screen and using a pc monitor
when that didn't work I tried going from HDMI to DVI
then I tried putting the two ram stick in the other ports
then I tried the AMD boot kit with their A8 CPU
then I tried just 1 ram slot as well as moving them around and swapping between them
then I tried a discrete GPU
then I just tried leaving it for like 10-15 minutes to try and boot
then removing that silver battery thing which I think was the CMOS and putting it back in
I'm genuinely running out of idea's I've checked every wire, I've tried 3 different PSU's, I've tried DVI, HDMI and DisplayPort on two different screens and a TV
The error lights on the motherboard do one of 3 things
either it one by one lights up CPU, then DRAM, then VGA and BOOT at the same time
it repeats that over and over
or it gets stuck on ram (that doesn't happen if I move them around a bit and try a single stick)
or eventually it will just light up VGA and BOOT and stay there
that's basically the whole story, why can't I get this thing working, it only powers then the screen simply doesn't detect a signal
I just want to know how I can get this thing to boot in some way, any suggestions would be appreciated
Facebook
Twitter
Instagram