Hi all,
I have currently cloned C: from a 120 GB SSD to a Samsung 250GB 970 EVO m.2 nVME SSD. If my original SS, my 1 TB HDD (for games and such) and the m.2 drive are connected, BIOS nor Windows Explorer does not detect the m.2 drive. However, if I ONLY have the m.2 drive connected, my Windows boots up and can use my PC as normal and BIOS can detect this drive. I currently have the m.2 slots set to PCIE.
If I try booting with my HDD plugged in alongside the m.2, my computer will power on for about a second and will not power on again until doing a full power cycle and plugging in the original SSD and HDD.
What am I missing to allow me to run Windows off the m.2 drive and then have the SSD and HDD as additional storage units? I cannot wipe the SSD drive because it still contains Windows on it from when I did the clone through the Samsung Data Migration application.
My MOBO is an ASUS Prime B360M-A. I know there are 2 m.2 ports and I have installed it into the one that supports SATA, but in BIOS i am running it as PCIe.
Please let me know if you need further details! Any support is greatly appreciated!
Cheers,
I have currently cloned C: from a 120 GB SSD to a Samsung 250GB 970 EVO m.2 nVME SSD. If my original SS, my 1 TB HDD (for games and such) and the m.2 drive are connected, BIOS nor Windows Explorer does not detect the m.2 drive. However, if I ONLY have the m.2 drive connected, my Windows boots up and can use my PC as normal and BIOS can detect this drive. I currently have the m.2 slots set to PCIE.
If I try booting with my HDD plugged in alongside the m.2, my computer will power on for about a second and will not power on again until doing a full power cycle and plugging in the original SSD and HDD.
What am I missing to allow me to run Windows off the m.2 drive and then have the SSD and HDD as additional storage units? I cannot wipe the SSD drive because it still contains Windows on it from when I did the clone through the Samsung Data Migration application.
My MOBO is an ASUS Prime B360M-A. I know there are 2 m.2 ports and I have installed it into the one that supports SATA, but in BIOS i am running it as PCIe.
Please let me know if you need further details! Any support is greatly appreciated!
Cheers,