- Jul 20, 2018
- 4
- 0
- 10
Building new system, specs are:
CPU: AMD Ryzen 2600X
Motherboard: MSI B350M PRO-VD PLUS
RAM: Corsair Vengeance 16GB 3000MHz (2 x 8GB)
GPU: EVGA 1060 6GB SC
PSU: Corsair CX450M
Built system, wouldnt POST or anything despite all components receiving power. Looked through many posts and figured my mobo prob got ruined or something as i was working on carpet and not being very careful. RMA'ed my motherboard, and nothing has changed. Current running with one stick of RAM, No GPU. Just CPU, stock cooler, and RAM. I have checked each stick of RAM in both of 2 slots on mobo. Unplugged and plugged in everything several times. Checked my PSU with paperclip. Checked with a monitor with VGA -> VGA and HDMI -> DVI (gpu), and with a TV with DVI -> HDMI, and HDMI -> HDMI. Reset cmos by shorting JBAT1, and removing battery for 5 minutes+, drained power with power button for 2 minutes.
When i press power button, CPU fan starts and all LEDs light up. Debug LEDs on mobo flash, wait on 'DRAM' for a second, then turn off. CPU fan then slows down and stays stable. No output at all. Dont have internal speaker, one is arriving tomorrow. Anything i can do until then?
CPU: AMD Ryzen 2600X
Motherboard: MSI B350M PRO-VD PLUS
RAM: Corsair Vengeance 16GB 3000MHz (2 x 8GB)
GPU: EVGA 1060 6GB SC
PSU: Corsair CX450M
Built system, wouldnt POST or anything despite all components receiving power. Looked through many posts and figured my mobo prob got ruined or something as i was working on carpet and not being very careful. RMA'ed my motherboard, and nothing has changed. Current running with one stick of RAM, No GPU. Just CPU, stock cooler, and RAM. I have checked each stick of RAM in both of 2 slots on mobo. Unplugged and plugged in everything several times. Checked my PSU with paperclip. Checked with a monitor with VGA -> VGA and HDMI -> DVI (gpu), and with a TV with DVI -> HDMI, and HDMI -> HDMI. Reset cmos by shorting JBAT1, and removing battery for 5 minutes+, drained power with power button for 2 minutes.
When i press power button, CPU fan starts and all LEDs light up. Debug LEDs on mobo flash, wait on 'DRAM' for a second, then turn off. CPU fan then slows down and stays stable. No output at all. Dont have internal speaker, one is arriving tomorrow. Anything i can do until then?
Facebook
Twitter
Instagram