G gianlucagerosa2000 Aug 5, 2018 4 0 10 Aug 5, 2018 #1 I was on the BIOS and i decided to change my CPU's Frequency, then i save changes and exit the computer didn't boot again, just fans working but no load, nothing. How i fix this?
I was on the BIOS and i decided to change my CPU's Frequency, then i save changes and exit the computer didn't boot again, just fans working but no load, nothing. How i fix this?
Solution M M mbarnes86 Aug 5, 2018 hi reset the cmos using jumper this should clear the settings and on next startup should use the default settings If this does not work give the motherboard make & model & cpu details regards Mike Barnes
hi reset the cmos using jumper this should clear the settings and on next startup should use the default settings If this does not work give the motherboard make & model & cpu details regards Mike Barnes
G Graeme9 Distinguished Mar 29, 2014 37 0 18,530 Aug 5, 2018 #2 can you get back in to bios. Upvote -1 Downvote
M mbarnes86 Splendid Sep 16, 2010 3,839 7 26,965 Aug 5, 2018 Solution #3 hi reset the cmos using jumper this should clear the settings and on next startup should use the default settings If this does not work give the motherboard make & model & cpu details regards Mike Barnes Upvote 0 Downvote Solution
hi reset the cmos using jumper this should clear the settings and on next startup should use the default settings If this does not work give the motherboard make & model & cpu details regards Mike Barnes
G gianlucagerosa2000 Aug 5, 2018 4 0 10 Aug 5, 2018 #4 I try Jumper and did not work. The computer is an Lantis housing, idk about motherboard and CPU, o think the cpu is pentium III, i think Upvote 0 Downvote
I try Jumper and did not work. The computer is an Lantis housing, idk about motherboard and CPU, o think the cpu is pentium III, i think
G gianlucagerosa2000 Aug 5, 2018 4 0 10 Aug 5, 2018 #5 Pc133 GfXel is the motherboard Upvote 0 Downvote
G gianlucagerosa2000 Aug 5, 2018 4 0 10 Aug 5, 2018 #6 The BIOS chip was inverted, idk how happened Upvote 0 Downvote