Hello everyone, 2 days ago I finished assembling my first custom loop, I noticed after 1/2 hours of use that inside the loop precisely in the Res and monoblock was formed a kind of condensation (I leave some photos below to make you understand better) , I would ask for advice to the most experienced to understand if it is all normal or if these micro bubbles are air trapped in the loop..I do not know if it can be helpful but I precise that for this loop I used a pastel liquid , precisely a pastel nano liquid from Mayhems, but before mount anything I flushed the rads with bidistilled water and white vinegar before assembling everything .. After assembling the all thing I did the leak test with bidistilled water , and when I put the liquid inside the loop some bidistilled water was trapped in the radiators so it mixed up , Below the images :
http://
http://
Also every day I notice that in the res drops very little the level of the liquid, as if the loop was taking it in small quantities.
Thank you very much in advance and sorry for my english, it's not my first language
.
http://
http://
Also every day I notice that in the res drops very little the level of the liquid, as if the loop was taking it in small quantities.
Thank you very much in advance and sorry for my english, it's not my first language
.
Facebook
Twitter
Instagram