Hello everyone, hope some can help me with the troubleshooting of r+ 2400g.
This is my build on ppicker.
https://pcpartpicker.com/list/pM7hFt
Basically r5 2400g+asus strix x370-f + team dark ram 2x4 2666mhz cl15.
My first mistake is looking for trouble working with early release r+ which is plagued by compatibility issue. Which first i didn't pay attention since there's number of review indicating it works just fine.
So i assemble everything with a6 9500 to update the bios. I'm installing win10 btw. Got all driver updated to the last version.
The last is to update the bios asus to 4012. And continue booting with the updater cpu just to make sure bios wont cause any instability with os.
Then i change the cpu to 2400g.
And booting up with qled post(dram)
I've try reslotting in any combinations but alas there's no luck.
Then i suspect the culpirt must be the bios. So i restocking the updater cpu and its pulsing with RED qled.
I jus need a green light so my mobo will act as traffict light..
Hv been try to sorting the clrt pin to reset the bios then booting but still red pulsing. Been retry 2x then replug anything on 3rd attemp. Still...
Is there anything i can do before i working with cmos?
Before i steep down to r5 1600 due to compability issues?
Thanks..
This is my build on ppicker.
https://pcpartpicker.com/list/pM7hFt
Basically r5 2400g+asus strix x370-f + team dark ram 2x4 2666mhz cl15.
My first mistake is looking for trouble working with early release r+ which is plagued by compatibility issue. Which first i didn't pay attention since there's number of review indicating it works just fine.
So i assemble everything with a6 9500 to update the bios. I'm installing win10 btw. Got all driver updated to the last version.
The last is to update the bios asus to 4012. And continue booting with the updater cpu just to make sure bios wont cause any instability with os.
Then i change the cpu to 2400g.
And booting up with qled post(dram)
I've try reslotting in any combinations but alas there's no luck.
Then i suspect the culpirt must be the bios. So i restocking the updater cpu and its pulsing with RED qled.
I jus need a green light so my mobo will act as traffict light..
Hv been try to sorting the clrt pin to reset the bios then booting but still red pulsing. Been retry 2x then replug anything on 3rd attemp. Still...
Is there anything i can do before i working with cmos?
Before i steep down to r5 1600 due to compability issues?
Thanks..