Here are my specs.
MSI 970a-g43 motherboard
AMD fx 8120 cpu
PowerColor radeon rx580 8gb gpu
16 gb kingston hyperx ddr3 ram
64gb ssd
750 watt psu
Everything worked great, until I decided to install a watercooling system, the nzxt kraken m22 120mm. I also installed a 7200rpm 2tb barracuda 3.5 hdd as well. After I finished installing everything, I booted my computer and I get no signal. I removed the water block and cpu, and notices I bent a few of the pins, so I used a razor blade and straightened them back out, still no display. Please help! I'm afraid I killed my cpu when I bent the pins, but don't want to buy a new one unless absolutely necessary.
MSI 970a-g43 motherboard
AMD fx 8120 cpu
PowerColor radeon rx580 8gb gpu
16 gb kingston hyperx ddr3 ram
64gb ssd
750 watt psu
Everything worked great, until I decided to install a watercooling system, the nzxt kraken m22 120mm. I also installed a 7200rpm 2tb barracuda 3.5 hdd as well. After I finished installing everything, I booted my computer and I get no signal. I removed the water block and cpu, and notices I bent a few of the pins, so I used a razor blade and straightened them back out, still no display. Please help! I'm afraid I killed my cpu when I bent the pins, but don't want to buy a new one unless absolutely necessary.
Facebook
Twitter
Instagram