Hello all,
I recently finished a new system and , as the title suggests, simply get a no signal error upon boot. All the lights in the system turn on, as well as the fan and pump but nothing happens beyond that.
I also did a test boot of the system (just on the motherboard box) before I put it in the system, and all the components worked great.
Specs:
So far I have tried:
Anything else I can try?
Edit
I cleared CMOS, and that didn't fix it. However, I then realized that for some reason my monitor way saying "DP (new line) No Signal". However...I was using HDMI. I tried plugging in a displayport cable, and then it suddenly worked. What is odd is that I was originally using a displayport cable ~~ my guess is that I had a different issue which I somehow fixed through one of the things I tried, but only after switching from DP to HDMI which is why I didn't notice anything.
I recently finished a new system and , as the title suggests, simply get a no signal error upon boot. All the lights in the system turn on, as well as the fan and pump but nothing happens beyond that.
I also did a test boot of the system (just on the motherboard box) before I put it in the system, and all the components worked great.
Specs:
1950x
Asus Prime X399-a
EK Monoblock (CPU+VRMs)
2x Strix 1080 Ti
Ek GPU Blocks
ASUS fancy high-bandwith SLI bridge
Corsair Vengeance LED RAM, 32gb (4x8gb)
Samsung 970-evo m.2 NVME SSD
Corsair HX1000i PSU
Ek D5 Revo Pump+Res
2 Alphacool Crossflow Radiators
9 Be Quiet! Silent Wings 3 Fans
So far I have tried:
Using different ports and cables
Unplugging the PC and holding the power-button for 45 seconds
Swapping RAM sticks around
Double and triple-checking GPU seating (one was slightly tilted, but fixing this didn't fix the issue)
Double and triple-checking power cables (again ~ one or two were slightly lose, but fixing this didn't fix anything...)
Anything else I can try?
Edit
I cleared CMOS, and that didn't fix it. However, I then realized that for some reason my monitor way saying "DP (new line) No Signal". However...I was using HDMI. I tried plugging in a displayport cable, and then it suddenly worked. What is odd is that I was originally using a displayport cable ~~ my guess is that I had a different issue which I somehow fixed through one of the things I tried, but only after switching from DP to HDMI which is why I didn't notice anything.