New Build Having a couple of issues

Sep 3, 2018
1
0
10
Build Specs
CPU: Intel i7-8700k
Mobo: Aorus z370 Gaming 7
RAM: Corsair Vengeance LPX DDR4 DRAM 2400MHz C16 (PC4-19200) CMK8GX4M1A2400C16) (2 x 8gb)
Hard Drive: Seagate 2TB BarraCuda SATA
No Graphics Card Yet Installed (CPU has integrated Graphics)
PSU: EVGA 500 W1, 80+ White

I've been having trouble getting my new build to do much of anything, I haven't been getting a beep code. When I press the power button on my PSU the LED's on the mobo light up for a split second and turn off, however the Power button on my Mobo and my case both stay lit up. When I press the power button on my Mobo the Fans and Fan LED's on turn on for a split second and then shut off, I have also been unable to get my build to POST/Display on my Monitor. Tips would be appreciated!
 
Solution
Seems like every page on this site has a question like that. Answers are simple, either components are not compatible, one or more are DOA or it wasn't put together properly.
Take out of the case, assemble only with MB, CPU, PSU and RAM, make sure you have a beeper on the MB or connected and plug it in. Listen carefully for beeps.
Seems like every page on this site has a question like that. Answers are simple, either components are not compatible, one or more are DOA or it wasn't put together properly.
Take out of the case, assemble only with MB, CPU, PSU and RAM, make sure you have a beeper on the MB or connected and plug it in. Listen carefully for beeps.
 
Solution

TRENDING THREADS