Hello guys. I have a H110M-K motherboard with a I5-6600 proc and a 1060 with 2x8 gb HyperX Fury Black ram(non dual-channel) one that i bought today and a older one. When i have both of them on the pc won't start(it turns on but it won't boot), if i have the older ram board in the 2nd slot it wont turn on either, but if i put the new one in the 2nd slot it turns on(both this cases the 1st slot is empty). Any ideas what this might be? The 2 ram boards are identical HX421C14FB2/8. Thanks in advance.
Pc won't boot up
- Thread starter deian99
- Start date
Memory is guaranteed in the form sold. There are no guarantees that other combinations you decide to make will be compatible together.
When adding extra memory the additional stress placed on the memory controller may cause the memory to be unable to operate at rated specifications. This may cause the memory to only be able to operate at a slower memory clock speed or the PC not to boot.
When adding extra memory the additional stress placed on the memory controller may cause the memory to be unable to operate at rated specifications. This may cause the memory to only be able to operate at a slower memory clock speed or the PC not to boot.
TRENDING THREADS
-
-
-
News US sanctions transform China into legacy chip production juggernaut — production jumped 40% in Q1 2024- Started by Admin
- Replies: 32
-
-
Question New pc build r9 7900x3d rtx 4080 super no post only ram rgb turns on- Started by Harvey Durward
- Replies: 5
-
RTX 4070 vs RX 7900 GRE faceoff: Which mainstream graphics card is better?
- Started by Admin
- Replies: 70
Facebook
Twitter
Instagram