Shadowplay causing lag in pubg

Nasser_2

Commendable
Jul 22, 2016
4
0
1,510
hi every one, i have i5-4670k @4.4Ghz and gtx 1050 non ti , i play pubg on high settings and some of them are low and i get around 70-80fps, but when i turn on the instant replay it cause a lag every 30-40s for like half second and it goes back to work normal
i tried a fixes like go back to older drivers for the gpu, uninstall the games and install it again but nothing changed , ill be grateful if any one can help me solving this problem.
Ps: this is my first post in the site and if i'm in the wrong section let me know , and sorry for my poor english
thanks in advance
 
Solution
here is the thing... a i5-4670k will barely run a Gtx 1050 ti at 1080P there is an 8% ~ bottleneck there... And you are forcing it by streaming, Try lowering shadowplay settings or the in game settings

Ramlethal

Estimable
here is the thing... a i5-4670k will barely run a Gtx 1050 ti at 1080P there is an 8% ~ bottleneck there... And you are forcing it by streaming, Try lowering shadowplay settings or the in game settings
 
Solution

Nasser_2

Commendable
Jul 22, 2016
4
0
1,510
i think thats the problem an also i found that when i turn on shadow play , the ram will be 100% and that maybe what causing the problem , ill be upgrading to 16gb and see how it goes , thanks i appreciate you help and your time
 

Ramlethal

Estimable


You may always try...
I would try to Overclock the CPU just a little bit to avoid the 1050 ti getting bottlenecked since the bottleneck is so small that a slight Overclock should fix the bottleneck issue, and also if you wish you can OC the CPU a bit more aggresive and slightly OC the 1050 ti. Upgrading the ram would also be a descent upgrade even if you go +4 gbs instead of +8. Just be sure the ones you purchase match the Frecuency of the ones you currently have to avoid any further issues and thats it.
 

Nasser_2

Commendable
Jul 22, 2016
4
0
1,510
well i dont have an 1050 ti mine is non ti and im on cheap water cooling i tried to go higher to 4.6 but the temp are so high like +85° and its not even stable at 4.6ghz clock speed ,now to the rams , is it matter the timing of the new one or i should look just for the frequency ?
 

Ramlethal

Estimable


More freq is just more than fine.