B450 tomahawk won't post, stuck on ez debug

Toggle sidebar Toggle sidebar
R

rzo.grieve

Sep 25, 2018
2
0
10
Hey everyone. I just excitedly finished building my PC and have run into an issue during first boot with no video to my monitor and my ez debug light on my mother board stays on ez debug boot led. Not sure what to do next. I tried pulling the ram out and leaving one stick in the dimma2 slot. Any help would be greatly appreciated. Thanks!

PC build is:
Ryzen 5 2400g
MSI b450 tomahawk
Corsair vengeance lpx 2*8gb ram
EVGA 650bq psu
Kingston 240gb SSD
Phanteks p400s case

 
Solution
m7mod
Try upgrading your bios:
1- Download the latest drivers for msi's website >> http://download.msi.com/bos_exe/mb/7C02v11.zip
2. Connect power supply to CPU_PWR1 and ATX_PWR1. (No other components are necessary but power supply.)
3. Plug the USB flash drive that contains the MSI.ROM file into the BIOS FLASHBACK+ port on rear I/O panel.
4. Press the BIOS FLASHBACK+ button to flash BIOS, and the LED next to FLASHBACK+ button starts flashing.
5. After the flashing BIOS process is 100% completed, the LED would be off simultaneously.

Wish you luck.
Sort by date Sort by votes
m7mod

m7mod

Distinguished
Apr 24, 2015
284
2
19,065
Try upgrading your bios:
1- Download the latest drivers for msi's website >> http://download.msi.com/bos_exe/mb/7C02v11.zip
2. Connect power supply to CPU_PWR1 and ATX_PWR1. (No other components are necessary but power supply.)
3. Plug the USB flash drive that contains the MSI.ROM file into the BIOS FLASHBACK+ port on rear I/O panel.
4. Press the BIOS FLASHBACK+ button to flash BIOS, and the LED next to FLASHBACK+ button starts flashing.
5. After the flashing BIOS process is 100% completed, the LED would be off simultaneously.

Wish you luck.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom