Current Build:
CPU: Intel Core i7-8086K
GPU: x2 GeForce GTX 1080 SLI
MOBO: ASUS ROG Strix Z370-F
Problem:
I’ve recently upgraded my build’s MOBO and CPU. Before I upgraded I was able to use my Graphics Cards in SLI, and my Elgato HD60 Pro without any issues using only 3 PCIE lanes. Now after the upgrade I’m not able to boot into windows when the Elgato HD60 Pro is connected to the MOBO along with the GPUs. I’m not sure if I’m supposed to configure some of the settings in the MOBO to get it to work, please I need some help!
Old Parts:
MOBO: ASUS Z170-A
CPU: Intel Core i5-6600K
What I’ve done so far:
1. Updated the BIOS latest version
2. Installed proper Elgato drivers
3. Reset BIOS settings to default
4. Reset CMOS
5. Disabled Fast Boot
6. Used DDU to re-install fresh drivers per GPU
CPU: Intel Core i7-8086K
GPU: x2 GeForce GTX 1080 SLI
MOBO: ASUS ROG Strix Z370-F
Problem:
I’ve recently upgraded my build’s MOBO and CPU. Before I upgraded I was able to use my Graphics Cards in SLI, and my Elgato HD60 Pro without any issues using only 3 PCIE lanes. Now after the upgrade I’m not able to boot into windows when the Elgato HD60 Pro is connected to the MOBO along with the GPUs. I’m not sure if I’m supposed to configure some of the settings in the MOBO to get it to work, please I need some help!
Old Parts:
MOBO: ASUS Z170-A
CPU: Intel Core i5-6600K
What I’ve done so far:
1. Updated the BIOS latest version
2. Installed proper Elgato drivers
3. Reset BIOS settings to default
4. Reset CMOS
5. Disabled Fast Boot
6. Used DDU to re-install fresh drivers per GPU