- Oct 4, 2018
- 12
- 0
- 10
I'm trying to overclock my Rx 570 and I reached a core clock of 1356 mhz but then found I was getting artifacts in Heaven benchmark. Should I increase the voltage on my gpu?
Should I edit voltage when overclocking gpu?
- Thread starter lochgholson
- Start date
Roland Of Gilead
Titan
- Aug 8, 2008
- 10,291
- 2,242
- 77,690
Yes, but by one notch at a time, and then test again. keep doing that until there are no artefacts. Watch the heat. Monitor the GPU with MSI afterburner or something.
Make sure to test though.
Read a good guide on GPU OC'ing get familiar with what you are doing. You may want to increase the power too, and not adjust the voltage to begin with. Read about it, and be sure what you are doing and how to measure the affects of the things you change.
Make sure to test though.
Read a good guide on GPU OC'ing get familiar with what you are doing. You may want to increase the power too, and not adjust the voltage to begin with. Read about it, and be sure what you are doing and how to measure the affects of the things you change.
Roland Of Gilead
Titan
- Aug 8, 2008
- 10,291
- 2,242
- 77,690
something like this: https://www.youtube.com/watch?v=1q2XzCG0IpQ
this is the quick and easy guide, but be sure to run superposition through. It only takes 5 mins per run. But if you take it slow and do it right, you can OC your GPU safely and effectively with just 1 hr work.
this is the quick and easy guide, but be sure to run superposition through. It only takes 5 mins per run. But if you take it slow and do it right, you can OC your GPU safely and effectively with just 1 hr work.
- Oct 4, 2018
- 12
- 0
- 10
I watched the vid and I already knew all of what he said but he never said anything about increasing voltage. I guess my final question is what is the maximum safe level of voltage i can add to my rx 570? I haven't really found any answers online.
Roland Of Gilead
Titan
- Aug 8, 2008
- 10,291
- 2,242
- 77,690
That's different for every single card. You need to bump it one notch at a time, as I outlined above. Then test. If it passes with no artifacts, then increase clock and test again. Rinse, repeat!
TRENDING THREADS
-
Question Using cloning software for a dying HDD which shows only 10% health ?- Started by Mashuumatics
- Replies: 1
-
Question Wifi card speed fluctuating on my Lenovo Ideapad pro 5 16APH8- Started by sirdariush
- Replies: 6
-
News Windows 11 will reportedly display a watermark if your PC does not support AI requirements- Started by Admin
- Replies: 24
-
Question Recovering an old version of a Notepad file in Windows 10 ?- Started by MC72
- Replies: 2
-
Facebook
Twitter
Instagram