----------------------------------------------------------
Msi Gaming Pro H370
i7-8700K
Zotac GTX 1080 Ti
Corsair Vengeance LPX DDR4 2666 MHz
Samsung 970 Pro 500 GB
Samsung 850 Evo 500 GB
Kingston A400 120 GB
Kingston A400 120 GB
Western Digital Black Performance 6 TB
Western Digital Black Performance 6 TB
Rosewill Glacier 700W 80+
----------------------------------------------------------
Msi Afterburner Settings:
Voltage: Stock
Power Limit: 100 (stock)
Temp Limit: 84 (Stock)
Core Clock: +135
Memory Clock: +300
----------------------------------------------------------
Driver: 411.63
----------------------------------------------------------
Issue:
So basically, if I increase the Power Limit/Temp Limit with the same overclock as above, the graphics driver will crash during a benchmark. This makes absolutely no sense in my opinion, as having these limits maxed out before didn't cause any issues.
The overclock works normally if I don't touch the limits. The card works fine otherwise. In fact, I just replaced the thermal paste on the card and was able to push the temps down about 5 C.
Msi Gaming Pro H370
i7-8700K
Zotac GTX 1080 Ti
Corsair Vengeance LPX DDR4 2666 MHz
Samsung 970 Pro 500 GB
Samsung 850 Evo 500 GB
Kingston A400 120 GB
Kingston A400 120 GB
Western Digital Black Performance 6 TB
Western Digital Black Performance 6 TB
Rosewill Glacier 700W 80+
----------------------------------------------------------
Msi Afterburner Settings:
Voltage: Stock
Power Limit: 100 (stock)
Temp Limit: 84 (Stock)
Core Clock: +135
Memory Clock: +300
----------------------------------------------------------
Driver: 411.63
----------------------------------------------------------
Issue:
So basically, if I increase the Power Limit/Temp Limit with the same overclock as above, the graphics driver will crash during a benchmark. This makes absolutely no sense in my opinion, as having these limits maxed out before didn't cause any issues.
The overclock works normally if I don't touch the limits. The card works fine otherwise. In fact, I just replaced the thermal paste on the card and was able to push the temps down about 5 C.