- Nov 3, 2018
- 3
- 0
- 10
I'm trying to setup RAID 1 with two 4TB HDD and using a non RAID SSD as my boot drive but I'm having trouble.
I'm using the ASUS Maximum X Hero motherboard.
I already have windows 10 on my ssd (and was booting to windows before trying to setup RAID) and just installed two 4tb hdd and I went through the motherboard manual and followed the instructions to setup raid 1. I eventually setup it up but now it doesnt boot and going into repair.
Mobo manual instructions for raid...
1. Enter bios
2. Go to Adavmce menu>PCH Storage Configuration, then press enter.
3. Set the SATA mode selection item to [Intel RST Premium w/ Intel Optane System Acceleration (RAID)].
4.Go to boot menu >CSM (Compatibility Support Module)>Launch CSM, then ser the item to [Disable]
5.Save your changes and exit bios, then enter bios again.
6. Go to the advance menu>Intel(r) rapid storage technology menu.
I'm using the ASUS Maximum X Hero motherboard.
I already have windows 10 on my ssd (and was booting to windows before trying to setup RAID) and just installed two 4tb hdd and I went through the motherboard manual and followed the instructions to setup raid 1. I eventually setup it up but now it doesnt boot and going into repair.
Mobo manual instructions for raid...
1. Enter bios
2. Go to Adavmce menu>PCH Storage Configuration, then press enter.
3. Set the SATA mode selection item to [Intel RST Premium w/ Intel Optane System Acceleration (RAID)].
4.Go to boot menu >CSM (Compatibility Support Module)>Launch CSM, then ser the item to [Disable]
5.Save your changes and exit bios, then enter bios again.
6. Go to the advance menu>Intel(r) rapid storage technology menu.
Facebook
Twitter
Instagram