[SOLVED] is it safe to set ignore cpu core voltage under the monitor tab in asus bios

Toggle sidebar Toggle sidebar
G

gabrielg_

Commendable
Sep 27, 2018
10
0
1,510
everytime when i first power up i always get this error https://imgur.com/a/l2GwHLA. i tried changing psu still the same issue.i also tried to load optimized defaults in the bios still the same issue. i dont want to rma the motherboard. when i set ignore cpu core voltage it can boot normally https://imgur.com/a/hyfSEDv . will i damage the cpu if i do that(ignore the core voltage) ?
psu used - EVGA 700 watt 80 plus bronze
 
Solution
J
I think that core voltage would be considered very high.....if it was real....and I also think it probably could damage the CPU.

.....but being that it isn't damaged.....I'm suspecting that perhaps the sensor is faulty or being read wrong.

Perhaps you could try another temperature reading app like HWMonitor or HWInfo and see what that tells you the core voltage is.

Maybe the BIOS is just reading it wrong.

....or maybe its a bad sensor in which case everything would read it wrong.
Sort by date Sort by votes
J

jay32267

Champion
Mar 16, 2017
10,709
1,330
56,940
I think that core voltage would be considered very high.....if it was real....and I also think it probably could damage the CPU.

.....but being that it isn't damaged.....I'm suspecting that perhaps the sensor is faulty or being read wrong.

Perhaps you could try another temperature reading app like HWMonitor or HWInfo and see what that tells you the core voltage is.

Maybe the BIOS is just reading it wrong.

....or maybe its a bad sensor in which case everything would read it wrong.
 
Upvote 0 Downvote
Solution
G

gabrielg_

Commendable
Sep 27, 2018
10
0
1,510


https://imgur.com/a/ECND8II safe cpu core voltage?
 
Upvote 0 Downvote
G

gabrielg_

Commendable
Sep 27, 2018
10
0
1,510

how much volts to set for no overclocking?
cpu is r7 2700x
 
Upvote 0 Downvote
G

gabrielg_

Commendable
Sep 27, 2018
10
0
1,510



https://imgur.com/a/EUbttjV help me
 
Upvote 0 Downvote
G

gabrielg_

Commendable
Sep 27, 2018
10
0
1,510


after 10min cpu vcore drop to 1.428v https://imgur.com/a/33HqquL so i dont think its a bad sensor
 
Upvote 0 Downvote
A

audiospecaccts

Upstanding
Oct 13, 2018
149
0
210
its the 0.033 V readings on those internal regulators that seem to point to the motherboard. If your voltage readings on the atx connector and 12V MB aux power are ok measured with a digital multi meter, then I would replace the board.

edit:

The only other problem that could cause this: if you didn't install all the motherboard screws and one of the ground planes is not grounded.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom