Hello!
This is my first post on any of these sites, I figured this one is the best to look for the answer.
I have a problem with my nVidia networking controller. When I connect ethernet cable to port on my motherboard, it says that it is connected but there is no network access. Because of this I had to buy PCI ethernet card and put it inside, which works for now but soon I am getting 1Gbps internet and this PCI card doesn't support it (10/100), while port on motherboard does.
I have only internet (no phone or television) and there is only my PC connected to router with wire, while 2 or 3 devices use wifi.
System: Win 8.1 Pro
Router: ZyXEL VMG5313-B30A (black)
Motherboard: N68-GS3 UCC (nVidia all in one 1520)
PCI ethernet card: IC Plus IP100A 10/100 Fast Ethernet Adapter
Motherboard ethernet slot: nVidia networking adapter (Ethernet Driver (v67.80) WHQL)
BIOS: 1.4
So far I tried:
Thank you in advance.
This is my first post on any of these sites, I figured this one is the best to look for the answer.
I have a problem with my nVidia networking controller. When I connect ethernet cable to port on my motherboard, it says that it is connected but there is no network access. Because of this I had to buy PCI ethernet card and put it inside, which works for now but soon I am getting 1Gbps internet and this PCI card doesn't support it (10/100), while port on motherboard does.
I have only internet (no phone or television) and there is only my PC connected to router with wire, while 2 or 3 devices use wifi.
System: Win 8.1 Pro
Router: ZyXEL VMG5313-B30A (black)
Motherboard: N68-GS3 UCC (nVidia all in one 1520)
PCI ethernet card: IC Plus IP100A 10/100 Fast Ethernet Adapter
Motherboard ethernet slot: nVidia networking adapter (Ethernet Driver (v67.80) WHQL)
BIOS: 1.4
So far I tried:
Switching between all ports on router and reset.
TCP/IPv4 is set to obtain automatically (I tried also with static IP).
Changing MAC address on adapter.
Switching between all speeds on adapter settings.
Thank you in advance.