Well this problem has been happening since last year, i would get a whea error and my pc would not even get to the bios until mayber after a week it wouod come back on
Here are my specs
I7 6700k
GTx 1080 FTW
Asus z170-A
Seasonic 650w gold 80w
32gb dominator plats
Corsair 120ssd and 2 hdds
All are bought used except for the psu.
I had a corsair one before and changed it to this so i doubt the psu is the culprit.
Ok so i temporary fixed it for maybe 2 to 3 months by increasing the voltage to 1.38v and downclocking to 3.8 ghz
It happened again last night and like always its not turning on again
Already cleared cmos, reseated the ram, doubt its the graphics card since i have removed it before and it would still not turn on.
I think its either the mobo or cpu (or both since they are used)
I also dont think i installed the mobo to the case correctly:
1. Its giving me shocks when i touch the case
2. I think i screwed the mobo directly to the case without any standoffs
Buuut.. i would get the whea error way before i even had a case and i would put the mobo on a cardboard box just for testing.
Im really sunk so if anyone could help me it would be greatly appreciated :/
Here are my specs
I7 6700k
GTx 1080 FTW
Asus z170-A
Seasonic 650w gold 80w
32gb dominator plats
Corsair 120ssd and 2 hdds
All are bought used except for the psu.
I had a corsair one before and changed it to this so i doubt the psu is the culprit.
Ok so i temporary fixed it for maybe 2 to 3 months by increasing the voltage to 1.38v and downclocking to 3.8 ghz
It happened again last night and like always its not turning on again
Already cleared cmos, reseated the ram, doubt its the graphics card since i have removed it before and it would still not turn on.
I think its either the mobo or cpu (or both since they are used)
I also dont think i installed the mobo to the case correctly:
1. Its giving me shocks when i touch the case
2. I think i screwed the mobo directly to the case without any standoffs
Buuut.. i would get the whea error way before i even had a case and i would put the mobo on a cardboard box just for testing.
Im really sunk so if anyone could help me it would be greatly appreciated :/