[SOLVED] Amd fx 6300 clock speed fluctuating

Toggle sidebar Toggle sidebar
PrinceTexasLoaf

PrinceTexasLoaf

Reputable
Sep 28, 2018
774
91
5,440
so basically my cpu's clock speed moves freely so if i'd put it at 3.8ghz the cores would switch between 3.8ghz-3.5ghz and I was wondering how I could lock the clock speed I already tried throttle stop which it said my cpu isn't supported
 
Solution
clutchc


Don't expect much in the way of OC'ing with that board. It only has 3+1 power phases, a 95W CPU power limit, and no heat sinks on the VRMs (which lack protection). And Overclock.com rates the board as "Avoid for OC". I suspect as soon as you get above the 95W envelope, the CPU cores will throttle their speed.
Sort by date Sort by votes
PrinceTexasLoaf

PrinceTexasLoaf

Reputable
Sep 28, 2018
774
91
5,440


is there a way to lock the clock speed with an application without turning off turbo core?

 
Upvote 0 Downvote
clutchc

clutchc

Titan
Ambassador
Apr 22, 2009
43,150
411
131,790
There very well may be, but I'm not aware of any. If you turn off turbo, you can OC the FX-6300 to run at 3.8GHz all the time by simply changing the CPU multiplier to 19. Or the turbo speed of 4.1GHz by upping it to 20.5. You may have to watch temps at 4.1GHz if you are using the stock cooler. It may get too hot.
 
Upvote 0 Downvote
PrinceTexasLoaf

PrinceTexasLoaf

Reputable
Sep 28, 2018
774
91
5,440


I have gotten it to 4.3 ghz with turbo by tinkering with settings but I had the turbo fluctuating thing lol
So would I be able to turn it up to 4.1 ghz with turbo turned off also would I have to increase the voltage right now the voltage is at 1.32 volts

 
Upvote 0 Downvote
clutchc

clutchc

Titan
Ambassador
Apr 22, 2009
43,150
411
131,790
It is best to always disable turbo when OC'ing so the turbo mode doesn't dynamically raise the clock speed and make it unstable. You only need to raise the voltage if the OC is unstable. And try to stay below 1.5V. The higher the voltage, the shorter the CPU lifespan.

And don't OC w/o a good board, cooler, and PSU. What are you using?
 
Upvote 0 Downvote
clutchc

clutchc

Titan
Ambassador
Apr 22, 2009
43,150
411
131,790


Don't expect much in the way of OC'ing with that board. It only has 3+1 power phases, a 95W CPU power limit, and no heat sinks on the VRMs (which lack protection). And Overclock.com rates the board as "Avoid for OC". I suspect as soon as you get above the 95W envelope, the CPU cores will throttle their speed.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom