Hey all I've been looking on forum to see if anything fits.my description. Still can't resolve issue... I am running
My temps are 90-100c under full load
Idle about 30c
i7-6700k 4ghz stock
Z170 gaming 7 gigabit mb (updated firmware to f21) latest bios from.what I see
Rtx 2080
Ddr 4 tridentz 3400
H100i v2 liquod cooler
Everything is stock and am running high temps.definetly cant OC as I had no luck even at stock runs way too high
I removed all thermal paste and added pea size in middle.
I reset the block and didn't over screw the thumb screws.corsair shows pump at 3000rpm and fan at 1500rpm temps of the pump is 40c yet CPU is much higher . I did noticed the back plate the block connects to on the h100 v2 is loose but from my understanding that is normal. Some people said they used rubber washers so the back plate would not be loses.. which I tried still didnt help temp.
My temps are 90-100c under full load
Idle about 30c
i7-6700k 4ghz stock
Z170 gaming 7 gigabit mb (updated firmware to f21) latest bios from.what I see
Rtx 2080
Ddr 4 tridentz 3400
H100i v2 liquod cooler
Everything is stock and am running high temps.definetly cant OC as I had no luck even at stock runs way too high
I removed all thermal paste and added pea size in middle.
I reset the block and didn't over screw the thumb screws.corsair shows pump at 3000rpm and fan at 1500rpm temps of the pump is 40c yet CPU is much higher . I did noticed the back plate the block connects to on the h100 v2 is loose but from my understanding that is normal. Some people said they used rubber washers so the back plate would not be loses.. which I tried still didnt help temp.