AIO CPU cooler issue

Ben_Brown

Commendable
Dec 26, 2016
3
0
1,510
Hey guys I just recently bought an up here aio liquid cooler for my ryzen cpu, the connectors include a 3 pin rgb connector and a 3 pin cpu header only issue is I don't have a 3 pin rgb header on my motherboard, if I use the included molex adapter will I still be able to configure the LED lights on the cooler?
 

Barty1884

Retired Moderator
Which cooler did you buy specifically?

I'm not aware of an RGB AIO from upHere, only static LED AIOs (that aren;t very good, as an FYI).

All I see here:
https://www.amazon.ca/upHere-Technology-Performance-Adjustable-Compatible/dp/B07BVR74XL

Is a fan splitter (for the two fans on the Rad) and a fan header to molex adapter, incase you don't have a free fan header (and ensures the pump runs 100%).

I don't see any software control at all?
 
Solution

Ben_Brown

Commendable
Dec 26, 2016
3
0
1,510
Thanks v much for the reply don't worry I got it sorted, turns out there was no software, just a manual switch that had to be plugged into the fan controller :)