Hi all. Thanks in advance. I completed a new build not too long ago only to realize thanks to one of the nice members on this site that I had a wrong mobo that didn't have the correct chipset. Well needless to say I bought a correct motherboard and now when I breadboarded it, I get am ez debug light that is constantly on "boot" which indicates "booting device not detected or fail" and no further explanation via manual. I have no signal on my monitor and know that the monitor/hdmi work fine. I've even disconnected ram and only inserted one at a time in each channel to see if that was an issue but still no signal. I reseated everything including cpu power, atx power and cpu + heatsink. I'm really at a loss here. Any help would be greatly appreciated. Specs listed below:
I5-9600k
Msi z390i motherboard
2x16gb corsair vengeance led ram
Corsair 750 watt pay
Thank you again!
I5-9600k
Msi z390i motherboard
2x16gb corsair vengeance led ram
Corsair 750 watt pay
Thank you again!
Facebook
Twitter
Instagram