Asus Motherboard not recognizing my Corsair ram.

jakeewbank123 · Jan 9, 2019

I have an ASUS Rampage 4 Black Edition with 4x4 Corsair Vengeance ram, at first 2 of the ram sticks were not recognized (all were plugged in on the slots left of the cpu). After attempting to rearrange the order, the Motherboard produced 1 long beeps and 2 short ones, which meant it has no memory detected. I tried all types of configurations of ram and even tried using my other 4x2 Hyperx fury ram, which still did not work. What is strange about this is that if I plug my ram into the slots on the right side of the CPU the beeping stops, but the computer doesn’t boot at all. The PC was working just fine before I rearranged the ram.

faalin · Jan 9, 2019

For 4 sticks of ram they should be in slots A1, B1, C1, and D1. For 2 sticks of ram they should be in B1 and D1. You can also find this information in your manual on page 1-11

Once you have the ram in the right slots hit the MEM Ok button and the system will go thru some checks to figure out what speed to run the ram at.

Or if all else fails hit the bios rest button which is on the back I/O panel.

jakeewbank123 · Jan 9, 2019

Faalin, I tried what you said and the beep code stopped, however now my computer does not boot and turns off and turns back on after a while.
Edit: After I did what you said it did stop, however now when I boot it, the CPU Led is red, then it reboots with the DRAM Led as red, and after a while the CPU Led quickly turns red and the system powers off and on again. I’ve tried unplugging the 8 Pin CPU Connector and the 24 Pin system connector
2nd Edit: The PC Finally booted, I had 16 GB of ram inside and it only registered 12 GB. I used the MEMOK feature and then it registered 8 GB. After trying again it doesn’t even boot.

Search

Asus Motherboard not recognizing my Corsair ram.

jakeewbank123

Prominent

faalin

Illustrious

jakeewbank123

Prominent

TRENDING THREADS

Latest posts

Moderators online

Share this page