- Jan 14, 2019
- 4
- 0
- 10
Hello guys!
First of all sry for my english.
I built a new pc and it went okey. First day the cpu temp was between 32-41 degrees (aida64) with 250rpm (Noctua NH-U12S). under far cry 5 was 55-60 with 1200rpm.
Next day i needed to enable amd-v for vmware so i set the amd v enabled. i also seen that the ram uses only 2133mhz instead of 3200MHZ. so i set the xmp profile 2 enabled.
after reboot i realized that the pc is a litle bit more loud so i checked he aida64 and saw that the cpu has 35-47 degrees with 1000rpm. Tunder far cry didnt changed much. 58-63 degrees with 1200rpm.
For test i disabled amd-v and xmp profile, but the temp didnt changed. didnt get back my low temp and 250rpm
What could happen? when i enabled amd-v and xmp then it also enabled another settings too? how could i reset the motherboard settings to default?
B450 tomahawk.
thank you very much for help guys!
First of all sry for my english.
I built a new pc and it went okey. First day the cpu temp was between 32-41 degrees (aida64) with 250rpm (Noctua NH-U12S). under far cry 5 was 55-60 with 1200rpm.
Next day i needed to enable amd-v for vmware so i set the amd v enabled. i also seen that the ram uses only 2133mhz instead of 3200MHZ. so i set the xmp profile 2 enabled.
after reboot i realized that the pc is a litle bit more loud so i checked he aida64 and saw that the cpu has 35-47 degrees with 1000rpm. Tunder far cry didnt changed much. 58-63 degrees with 1200rpm.
For test i disabled amd-v and xmp profile, but the temp didnt changed. didnt get back my low temp and 250rpm
What could happen? when i enabled amd-v and xmp then it also enabled another settings too? how could i reset the motherboard settings to default?
B450 tomahawk.
thank you very much for help guys!
Facebook
Twitter
Instagram