mit meinen Brennern & Nero

Hi,
bin leider am Ende meiner Weisheit angekommen!
Habe mir vor kurzem einen neuen Rechner & Co., unter anderem auch Teac CD-W552E & Plextor PX-708 gekauft. Da ich mit meinem altem System (anderer Rechner und andere Brenner) sehr oft mit Nero gleichzeitig CD's gebrannt habe, versuchte ich dies auch mit meinem Neuen. Leider brennt mir das neue System mit Nero (6.0.0.19 oder auch 5.5.10.42) zwar gleichzeitig, aber der Buffer-Speicher wechselt abwechselnd immer auf voll und leer bei beiden Brennern, so daß der Brennvorgang erheblich verlangsamt wird (ca. 5min für ein 750MB-Image). Ok, habe dann mal eine Geschwindigkeitsmessung mit dem Teac gemacht und folgende Meldung brachte mir Nero:
Es kann nur mit 16x anstatt 52x, da die Geschwindigkeit der Datenquelle zu gering ist
Diese Meldung gibt mir Nero auch bei dem Plextor (einige unterschiedliche Rohlinge getestet) und sogar auch bei einer Geschwindigkeitsmessung mit dem Image-Recorder.
Nach einem Benchmark mit Dr.Hardware stellte sich heraus, daß es vermutlich an den Festplatten auch nicht liegt (im Schnitt 40.000kb/s)
Firmware der Brenner ist aktualisiert und auch eine Komplett-Neuinstallation von XP Pro half nichts! *gr*
System:
Intel P4 3000MHz, 800MHz, 512kB
Asus P4P800 Deluxe
DDR-RAM 2 x 512MB Corsair Twinx
Seagate SATA 160Gb
2 weitere IDE Festplatten (beide am sekundären IDE-Kanal Ultra-DMA-Modus 5 aktiviert)
Plextor PX-708 & Teac CD-W552E black 52x24x52x (beide am sekundären IDE-Kanal Ultra-DMA-Modus 2 aktiviert)
Windows XP Pro SP1
Logdatei von Nero:
zitat:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17.07.2002 09:20:56
ahead WinASPI: File 'CrogrammeAheadNeroWnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17.06.2003 15:25:04
Nero Version: 6.0.0.19
Recorder: Version: 1.09 - HA 2 TA 0 - 6.0.0.19
Adapter driver: HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: Version: 1.0 - HA 4 TA 0 - 6.0.0.19
Adapter driver: HA 4
=== Scsi-Device-Map ===
DiskPeripheral : ST3160023AS iaStor Port 0 ID 0 DMA: On
DiskPeripheral : IC35L180AVV207-1 atapi Port 1 ID 0 DMA: On
DiskPeripheral : IC35L060AVER07-0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : TEAC CD-W552E atapi Port 2 ID 0 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-708A atapi Port 2 ID 1 DMA: On
DiskPeripheral : MAXTOR 4K040H2 A08. viaraid Port 3 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 st3shark Port 4 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 st3shark Port 4 ID 1 DMA: Off
CdRomPeripheral : VOBID InstantDrive CD 14 VOBID Port 5 ID 0 DMA: Off
=== CDRom-Device-Map ===
TEAC CD-W552E F: CDRom0
PLEXTOR DVDR PX-708A G: CDRom1
Generic DVD-ROM Z: CDRom2
Generic DVD-ROM Y: CDRom3
VOBID InstantDrive CD X: CDRom4
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1022MB (1047272kB)
Free physical memory: 622MB (637320kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.11.2003
CueSheet
01:54:52 #1 Phase 72 File dlgbrnst.cpp, Line 1843
BURN-Proof activated
01:54:52 #2 Text 0 File Reader.cpp, Line 118
Reader running
01:54:52 #3 Text 0 File Writer.cpp, Line 127
Writer TEAC CD-W552E running
01:54:52 #4 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-Once, using CD-R/RW media
01:54:52 #5 Text 0 File DlgWaitCD.cpp, Line 230
Last possible write address on media: 359845 (79:59.70)
Last address to be written: 331747 (73:45.22)
01:54:52 #6 Text 0 File DlgWaitCD.cpp, Line 235
Write in overburning mode: FALSE
01:54:52 #7 Text 0 File DlgWaitCD.cpp, Line 1949
Recorder: TEAC CD-W552E;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
01:54:52 #8 Text 0 File DlgWaitCD.cpp, Line 394
>>> Protocol of DlgWaitCD activities: <<<
=========================================
01:54:52 #9 Text 0 File ThreadedTransferInterface.cpp, Line 769
Setup items (after recorder preparation)
0: TRM_DATA_RAW_MODE1 (Cue Sheet Track)
2 indices, index0 (150) provided
original disc pos #0 + 331748 (331748) = #331748/73:43.23
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE1, 2352, config 0, wanted index0 0 blocks, length 331748 blocks [TEAC CD-W552E ]
-
01:54:52 #10 Text 0 File ThreadedTransferInterface.cpp, Line 938
Prepare recorder [TEAC CD-W552E ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_RAW_MODE1, 2352/0x00, FilePos 0 352800 780624096, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
331748 | lead-out | 1 | 0x00 | 0x41
01:54:52 #11 Phase 24 File dlgbrnst.cpp, Line 1843
Caching of files started
01:54:52 #12 Phase 25 File dlgbrnst.cpp, Line 1843
Caching of files completed
01:54:52 #13 Phase 28 File dlgbrnst.cpp, Line 1843
Speed measurement started
01:54:52 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
01:58:05 #15 Text 0 File WriterStatus.cpp, Line 113
start writing Lead-Out at LBA 331748 (50FE4h), lenght 0 blocks
01:58:05 #16 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
01:58:05 #17 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
01:58:05 #18 Phase 29 File dlgbrnst.cpp, Line 1793
Speed measurement completed: 476,5x (71.475 KB/s) <<< Festplatte gäbs also her?!?
01:58:05 #19 Text 0 File Burncd.cpp, Line 4206
Es kann nur mit 16x anstatt 52x geschrieben werden,
da die Geschwindigkeit der Datenquelle zu gering ist.
Existing drivers:
File 'DriversCDRALW2K.SYS': Ver=6.1.0.79 , size=24698 bytes, created 14.05.2003 00:18:02
File 'DriversASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17.07.2002 08:53:02
File 'Driversatapi.sys': Ver=5.1.2600.1164 (xpsp2.021217-1051), size=87040 bytes, created 31.01.2003 15:43:30 (Adapter driver for rec)
File 'Driversst3shark.sys': Ver=3.41.0.0 built by: WinDDK, size=5504 bytes, created 27.09.2003 14:37:16 (Adapter driver for src)
Registry Keys:
HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogonAllocateCDROMs : 0 (Security Option)
Hoffentlich hat jemand ne Lösung!

Altes System:
Intel P4 1400MHz
Asus PT4
512MB Ram
2 IDE Festplatten (beide am primären IDE-Kanal Ultra-DMA-Modus 4+5 aktiviert)
Philips DVDRW228 & Teac CD-W524E (beide am sekundären IDE-Kanal Ultra-DMA-Modus 2 aktiviert)
Windows XP Pro SP1
Log diesen Rechners im Nero (Speed liegt beim Geschwindigkeitstest bei 39,4x, der mir auch in Ordnung scheint)
========================================
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programme\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17.06.2003 15:25:04
Nero Version: 6.0.0.19
Recorder: <TEAC CD-W524E> Version: 1.0D - HA 1 TA 0 - 6.0.0.19
Adapter driver: <atapi> HA 1
Drive buffer : 1404kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.0.0.19
Adapter driver: <st3shark> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD307AA-00BAA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : SAMSUNG SV4084H atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TEAC CD-W524E atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVDRW228 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 st3shark Port 2 ID 0 DMA: Off
DiskPeripheral : OnStream DI-30 FCUSB Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
TEAC CD-W524E E: CDRom0
PHILIPS DVDRW228 F: CDRom1
Generic DVD-ROM Z: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523740kB)
Free physical memory: 103MB (105696kB)
Memory in use : 79 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.11.2003
CueSheet
11:15:37 #1 Phase 72 File dlgbrnst.cpp, Line 1843
BURN-Proof activated

11:15:37 #2 Text 0 File Reader.cpp, Line 118
Reader running

11:15:37 #3 Text 0 File Writer.cpp, Line 127
Writer TEAC CD-W524E running

11:15:37 #4 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-Once, using CD-R/RW media

11:15:37 #5 Text 0 File DlgWaitCD.cpp, Line 230
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 287091 (63:49.66)

11:15:37 #6 Text 0 File DlgWaitCD.cpp, Line 235
Write in overburning mode: FALSE

11:15:37 #7 Text 0 File DlgWaitCD.cpp, Line 1949
Recorder: TEAC CD-W524E;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 00 00 (invalid)

11:15:37 #8 Text 0 File DlgWaitCD.cpp, Line 394
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:15:37 #9 Text 0 File ThreadedTransferInterface.cpp, Line 769
Setup items (after recorder preparation)
0: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
2 indices, index0 (150) provided
original disc pos #0 + 450 (450) = #450/0:6.0
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 450 blocks [TEAC CD-W524E ]
1: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
2 indices, index0 (0) provided
original disc pos #0 + 286642 (286642) = #286642/63:41.67
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 286642 blocks [TEAC CD-W524E ]
-

11:15:37 #10 Text 0 File ThreadedTransferInterface.cpp, Line 938
Prepare recorder [TEAC CD-W524E ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 1411200, ISRC ""
2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 1411200 1411200 675593184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
450 | 2 | 0 | 0x00 | 0x41
450 | 2 | 1 | 0x00 | 0x41
287092 | lead-out | 1 | 0x00 | 0x41

11:15:37 #11 Phase 24 File dlgbrnst.cpp, Line 1843
Caching of files started

11:15:37 #12 Phase 25 File dlgbrnst.cpp, Line 1843
Caching of files completed

11:15:37 #13 Phase 28 File dlgbrnst.cpp, Line 1843
Speed measurement started

11:15:37 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

11:15:37 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #450

11:17:27 #16 Text 0 File WriterStatus.cpp, Line 113
<TEAC CD-W524E > start writing Lead-Out at LBA 287092 (46174h), lenght 0 blocks

11:17:27 #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:17:28 #18 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

11:17:28 #19 Phase 29 File dlgbrnst.cpp, Line 1793
Speed measurement completed: 38,9x (5.835 KB/s)

Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.34, size=23420 bytes, created 03.10.2002 01:51:20
File 'Drivers\atapi.sys': Ver=5.1.2600.1164 (xpsp2.021217-1051), size=87040 bytes, created 31.01.2003 15:43:30 (Adapter driver for rec)
File 'Drivers\st3shark.sys': Ver=3.41.0.0 built by: WinDDK, size=5504 bytes, created 27.09.2003 14:37:16 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)