übertaktet hab ich ihn nie gehabt.
hab noch ne alte GF 4 4200 die ich probieren könnte
Wenn deine 4200 eine PCI Version ist, könntest du damit testen.
Also entweder eine normale "alte" PCI Karte oder eine PCIE.
Gruss Sam
Fredo
Du hast doch zwei PEG Slots auf dem MB oder? Hast du mal die Karte im anderen Slot probiert?
Ansonsten wärs wohl am Besten, wenn du ne andere PCIe Karte zum Testen hättest. Vielleicht hat ja ein Kumpel noch was rumliegen, was du dir mal ausleihen darfst.
Gruß
Frederik
Bongokongo
übertaktet hab ich ihn nie gehabt.
hab noch ne alte GF 4 4200 die ich probieren könnte
Sam1
Zitat :
Explanation: The BIOS is unable to access the video system in order to write any error messages to the screen.
Diagnosis: This is usually caused by a problem with the video card, or the memory on the video card. It can also be a motherboard issue.
Grafikkarte steckt nicht schlecht am Motherboard drauf, jedoch ist mir aufgefallen dass einer der Kupferkontakte an der stelle die man ins MB steckt zur HÄlfte abgebrochen ist auf der Platine.Mainboard
Hast du keine andere Graka zum testen (kann ja auch eine alte PCI Karte sein) ??
Weil angebrochene Kontakte und "This is usually caused by a problem with the video card, or the memory on the video card. It can also be a motherboard issue" passen sehr gut zusammen :wink:
sherifx
hast du den Pc übertaktet?
Deaktivier mal im Bios den "PEG Link Mode"
Bongokongo
Hi ich habe seit längerem ein Problem mit meinem PC.
Und zwar bootet er immer mit einem lang-kurz-kurz BIOS beep was in der liste für
Explanation: The BIOS is unable to access the video system in order to write any error messages to the screen.
Diagnosis: This is usually caused by a problem with the video card, or the memory on the video card. It can also be a motherboard issue. steht.
Jedoch hab ich jetzt keine Ahnung ob es die GFX oder das Mainboard sein könnte.
Generell boote ich ca. 30 mal bis ich ein normales Beepgeräusch bekomme, danach muss ich nochmal booten da der screen auch beim ersten normalen Booten nicht kommt. Bildschirm bleibt komplett schwarz. Windows bootet sich jedoch und ist ganz normal herunterfahrbar.
Grafikkarte steckt nicht schlecht am Motherboard drauf, jedoch ist mir aufgefallen dass einer der Kupferkontakte an der stelle die man ins MB steckt zur HÄlfte abgebrochen ist auf der Platine.
Hoffe hier kennt sich jemand dazu aus :)
Mfg
edit: Besitze Nvidia GForce 6800
Asus A8N SLI Mainboard