FORUM Tom's Hardware

Brenner LG GSA H62N hängt bei leadin

Thread, in dem Sie antworten
Thread : Brenner LG GSA H62N hängt bei leadin
mfgnst	Hallo, ich hab da ein Problem mit meinem Brenner. Der kommt nicht über das Leadin hinaus - bei nero 6% wenn ich ein Image brenne. Hab das Problem auch mit diverser Freeware. Zuerst läuft das Laufwerk hoch, und dann gehts nicht mehr weiter. Auch der Windows Explorer reagiert dann nicht mehr. Genauso der Taskmanager, erst wenn das Brennprogramm wieder beendet ist, was sehr lange dauern kann, gehts weiter. Hatte erst gedacht, dass es an der Freeware ImgBurn liegt. Aber nachdem ich Nero wieder installiert hatte war das gleiche Problem. Ich hab auch schon verschiedene Medien ausprobiert - hilft nichts. Vielleicht hat jemand eine Idee? Schon mal vielen Dank! Hier noch das Protokoll von Nero: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=13840 bytes, created 19.03.2007 19:19:24 NT-SPTI used Nero Version: 7.10.1.0 Internal Version: 7, 10, 1, 0 Recorder: <HL-DT-ST DVDRAM GSA-H62N>Version: CL01 - HA 1 TA 0 - 7.10.1.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <PT1141S LVH095T >Version: 1.0 - HA 1 TA 1 - 7.10.1.0 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRAM GSA-H62N atapi Port 1 ID 0 DMA: On DiskPeripheral : SAMSUNG SP2514N atapi Port 3 ID 0 DMA: On DiskPeripheral : SAMSUNG SP1604N atapi Port 3 ID 1 DMA: On CdRomPeripheral : PT1141S LVH095T 1.0 as2jszwd Port 4 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-H62N G: CdRom0 PT1141S LVH095T H: CdRom1 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1918MB (1964460kB) Free physical memory: 1173MB (1202124kB) Memory in use : 38 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.3.2008 CD Image 09:24:43 #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 09:24:43 #2 Text 0 File Burncd.cpp, Line 3196 HL-DT-ST DVDRAM GSA-H62N Schutz vor Pufferleerlauf aktiviert 09:24:43 #3 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using CD-R/RW media 09:24:43 #4 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 366220 ( 81:24.70) Last address to be written: 266229 ( 59:11.54) 09:24:43 #5 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 09:24:43 #6 Text 0 File DlgWaitCD.cpp, Line 2972 Recorder: HL-DT-ST DVDRAM GSA-H62N; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 09:24:43 #7 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 09:24:43 #8 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Modus 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 266230 (266230) = #266230/59:9.55 not relocatable, disc pos for caching/writing not required/not required -> TRM_ULTRARAW96_MODE1, 2448, config 4, wanted index0 0 blocks, length 266230 blocks [G: HL-DT-ST DVDRAM GSA-H62N] -------------------------------------------------------------- 09:24:43 #9 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [G: HL-DT-ST DVDRAM GSA-H62N] for write in raw writing DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos 0 367200 652098240, ISRC "" DAO layout: =========== ___Start_\|____Track_\|_Idx_\|_CtrlAdr_\|_____Size_\|______NWA_\|_RecDep__________ -150 \| lead-in \| 0 \| 0x41 \| 0 \| 0 \| 0x00 -150 \| 1 \| 0 \| 0x41 \| 0 \| 0 \| 0x00 0 \| 1 \| 1 \| 0x41 \| 266230 \| 266230 \| 0x00 266230 \| lead-out \| 1 \| 0x41 \| 0 \| 0 \| 0x00 09:24:43 #10 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 09:24:43 #11 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-No, small files-No (<64KB) 09:24:43 #12 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 48x (7.200 KB/s) 09:24:44 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 09:24:44 #14 Text 0 File MMC.cpp, Line 17687 StartDAO : CD-Text - Off 09:24:44 #15 Text 0 File MMC.cpp, Line 22363 Set BUFE: Buffer underrun protection -> ON 09:24:44 #16 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 09:27:51 #17 SPTI -1114 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x2A 00 FF FF E0 E0 00 00 1A 00 00 00 Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 80 29 Buffer x067e19c0: Len xf8a0 0x00 FF FF FF FF FF FF FF FF FF FF 00 99 95 57 61 0x00 28 00 1E 80 08 60 06 A8 02 FE 81 80 60 60 28 0x28 1E 9E 88 68 66 AE AA FC 7F 01 E0 00 48 00 36 09:27:51 #18 CDR -1114 File Writer.cpp, Line 303 Reset occurred G: HL-DT-ST DVDRAM GSA-H62N 09:27:52 #19 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 48x (7.200 KB/s) 09:27:53 #20 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 09:27:53 #21 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 09:27:53 #22 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)

Thread, in dem Sie antworten

Thread : Brenner LG GSA H62N hängt bei leadin

mfgnst

Hallo,
ich hab da ein Problem mit meinem Brenner.
Der kommt nicht über das Leadin hinaus - bei nero 6% wenn ich ein Image brenne.
Hab das Problem auch mit diverser Freeware.
Zuerst läuft das Laufwerk hoch, und dann gehts nicht mehr weiter. Auch der Windows Explorer reagiert dann nicht mehr. Genauso der Taskmanager, erst wenn das Brennprogramm wieder beendet ist, was sehr lange dauern kann, gehts weiter.

Hatte erst gedacht, dass es an der Freeware ImgBurn liegt. Aber nachdem ich Nero wieder installiert hatte war das gleiche Problem.
Ich hab auch schon verschiedene Medien ausprobiert - hilft nichts.

Vielleicht hat jemand eine Idee?

Schon mal vielen Dank!

Hier noch das Protokoll von Nero:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=13840 bytes, created 19.03.2007 19:19:24

NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0

Recorder: <HL-DT-ST DVDRAM GSA-H62N>Version: CL01 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PT1141S LVH095T >Version: 1.0 - HA 1 TA 1 - 7.10.1.0
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H62N atapi Port 1 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP2514N atapi Port 3 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP1604N atapi Port 3 ID 1 DMA: On
CdRomPeripheral : PT1141S LVH095T 1.0 as2jszwd Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-H62N G: CdRom0
PT1141S LVH095T H: CdRom1
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1918MB (1964460kB)
Free physical memory: 1173MB (1202124kB)
Memory in use : 38 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

30.3.2008
CD Image
09:24:43 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

09:24:43 #2 Text 0 File Burncd.cpp, Line 3196
HL-DT-ST DVDRAM GSA-H62N
Schutz vor Pufferleerlauf aktiviert

09:24:43 #3 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using CD-R/RW media

09:24:43 #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 366220 ( 81:24.70)
Last address to be written: 266229 ( 59:11.54)

09:24:43 #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

09:24:43 #6 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVDRAM GSA-H62N;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

09:24:43 #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

09:24:43 #8 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Modus 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 266230 (266230) = #266230/59:9.55
not relocatable, disc pos for caching/writing not required/not required
-> TRM_ULTRARAW96_MODE1, 2448, config 4, wanted index0 0 blocks, length 266230 blocks [G: HL-DT-ST DVDRAM GSA-H62N]
--------------------------------------------------------------

09:24:43 #9 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [G: HL-DT-ST DVDRAM GSA-H62N] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos 0 367200 652098240, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 266230 | 266230 | 0x00
266230 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

09:24:43 #10 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

09:24:43 #11 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-No, small files-No (<64KB)

09:24:43 #12 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 48x (7.200 KB/s)

09:24:44 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

09:24:44 #14 Text 0 File MMC.cpp, Line 17687
StartDAO : CD-Text - Off

09:24:44 #15 Text 0 File MMC.cpp, Line 22363
Set BUFE: Buffer underrun protection -> ON

09:24:44 #16 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

09:27:51 #17 SPTI -1114 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 FF FF E0 E0 00 00 1A 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 80 29
Buffer x067e19c0: Len xf8a0
0x00 FF FF FF FF FF FF FF FF FF FF 00 99 95 57 61
0x00 28 00 1E 80 08 60 06 A8 02 FE 81 80 60 60 28
0x28 1E 9E 88 68 66 AE AA FC 7F 01 E0 00 48 00 36

09:27:51 #18 CDR -1114 File Writer.cpp, Line 303
Reset occurred
G: HL-DT-ST DVDRAM GSA-H62N

09:27:52 #19 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 48x (7.200 KB/s)

09:27:53 #20 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

09:27:53 #21 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

09:27:53 #22 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)

Ihre Antwort

Username

Sie müssen registriert sein, um Beiträge in diesem Forum zu veröffentlichen .... Wenn Sie noch nicht registriert sind, klicken Sie bitte hier!

Icon

Ihre Antwort

Smileys

Liste eigener Smileys

[quotemsg=2972,1,35990]Hallo,
ich hab da ein Problem mit meinem Brenner.
Der kommt nicht über das Leadin hinaus - bei nero 6% wenn ich ein Image brenne.
Hab das Problem auch mit diverser Freeware.
Zuerst läuft das Laufwerk hoch, und dann gehts nicht mehr weiter. Auch der Windows Explorer reagiert dann nicht mehr. Genauso der Taskmanager, erst wenn das Brennprogramm wieder beendet ist, was sehr lange dauern kann, gehts weiter.

Hatte erst gedacht, dass es an der Freeware ImgBurn liegt. Aber nachdem ich Nero wieder installiert hatte war das gleiche Problem. 
Ich hab auch schon verschiedene Medien ausprobiert - hilft nichts.

Vielleicht hat jemand eine Idee?

Schon mal vielen Dank!

Hier noch das Protokoll von Nero:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=13840 bytes, created 19.03.2007 19:19:24

NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0

Recorder:             <HL-DT-ST DVDRAM GSA-H62N>Version: CL01 - HA 1 TA 0 - 7.10.1.0
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <PT1141S  LVH095T         >Version: 1.0  - HA 1 TA 1 - 7.10.1.0
 Adapter driver:      <SCSI>                    HA 1

=== Scsi-Device-Map ===
CdRomPeripheral      : HL-DT-ST DVDRAM GSA-H62N         atapi Port 1 ID 0  DMA: On 
DiskPeripheral       : SAMSUNG SP2514N                  atapi Port 3 ID 0  DMA: On 
DiskPeripheral       : SAMSUNG SP1604N                  atapi Port 3 ID 1  DMA: On 
CdRomPeripheral      : PT1141S LVH095T         1.0   as2jszwd Port 4 ID 0  DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-H62N   G:   CdRom0
PT1141S LVH095T            H:   CdRom1
=======================

AutoRun : 0
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 1918MB (1964460kB)
Free physical memory: 1173MB (1202124kB)
Memory in use       : 38 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

30.3.2008
CD Image
09:24:43	#1 Text 0 File SCSIPTICommands.cpp, Line 424
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
09:24:43	#2 Text 0 File Burncd.cpp, Line 3196
	HL-DT-ST DVDRAM GSA-H62N
	Schutz vor Pufferleerlauf aktiviert
	
09:24:43	#3 Text 0 File Burncd.cpp, Line 3508
	Turn on Disc-At-Once, using CD-R/RW media
	
09:24:43	#4 Text 0 File DlgWaitCD.cpp, Line 307
	Last possible write address on media:   366220 ( 81:24.70)
	Last address to be written:             266229 ( 59:11.54)
	
09:24:43	#5 Text 0 File DlgWaitCD.cpp, Line 319
	Write in overburning mode: NO (enabled: CD)
	
09:24:43	#6 Text 0 File DlgWaitCD.cpp, Line 2972
	Recorder: HL-DT-ST DVDRAM GSA-H62N;
	   CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
	   ATIP Data:
	     Special    Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
	     Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
	
09:24:43	#7 Text 0 File DlgWaitCD.cpp, Line 493
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
09:24:43	#8 Text 0 File ThreadedTransferInterface.cpp, Line 793
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (2 - CD-ROM Modus 1, ISO 9660)
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 266230 (266230) = #266230/59:9.55
	    not relocatable, disc pos for caching/writing not required/not required
	    -> TRM_ULTRARAW96_MODE1, 2448, config 4, wanted index0 0 blocks, length 266230 blocks [G: HL-DT-ST DVDRAM GSA-H62N]
	--------------------------------------------------------------
	
09:24:43	#9 Text 0 File ThreadedTransferInterface.cpp, Line 995
	Prepare [G: HL-DT-ST DVDRAM GSA-H62N] for write in raw writing
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos             0        367200     652098240, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	     -150 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	     -150 |        1 |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   1 |    0x41 |   266230 |   266230 | 0x00
	   266230 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
09:24:43	#10 Text 0 File SCSIPTICommands.cpp, Line 215
	SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
	
09:24:43	#11 Text 0 File Burncd.cpp, Line 4294
	Caching options: cache CDRom or Network-No, small files-No (<64KB)
	
09:24:43	#12 Phase 36 File dlgbrnst.cpp, Line 1762
	Burn process started at 48x (7.200 KB/s)
	
09:24:44	#13 Text 0 File ThreadedTransferInterface.cpp, Line 2721
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
09:24:44	#14 Text 0 File MMC.cpp, Line 17687
	StartDAO : CD-Text - Off
	
09:24:44	#15 Text 0 File MMC.cpp, Line 22363
	Set BUFE: Buffer underrun protection -> ON 
	
09:24:44	#16 Text 0 File ThreadedTransfer.cpp, Line 269
	Pipe memory size 83836800
	
09:27:51	#17 SPTI -1114 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
	Sense Key:  0x06 (KEY_UNIT_ATTENTION)
	Sense Code: 0x29
	Sense Qual: 0x00
	CDB Data:   0x2A 00 FF FF E0 E0 00 00 1A 00 00 00 
	Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 80 29 
	Buffer x067e19c0: Len xf8a0
	0x00 FF FF FF FF FF FF FF FF FF FF 00 99 95 57 61 
	0x00 28 00 1E 80 08 60 06 A8 02 FE 81 80 60 60 28 
	0x28 1E 9E 88 68 66 AE AA FC 7F 01 E0 00 48 00 36 
	
09:27:51	#18 CDR -1114 File Writer.cpp, Line 303
	Reset occurred
	G: HL-DT-ST DVDRAM GSA-H62N
	
09:27:52	#19 Phase 38 File dlgbrnst.cpp, Line 1762
	Burn process failed at 48x (7.200 KB/s)
	
09:27:53	#20 Text 0 File SCSIPTICommands.cpp, Line 261
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
09:27:53	#21 Text 0 File Cdrdrv.cpp, Line 11185
	DriveLocker: UnLockVolume completed
	
09:27:53	#22 Text 0 File SCSIPTICommands.cpp, Line 424
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)[/quotemsg]

Optionen

Ihre Signatur anzeigen
Smileys deaktivieren
E-Mail-Benachrichtigung für diesen Thread aktivieren

Vorschau

Passwort vergessen?

Thread Voransicht

kleineMax

Hatte das Problem bei ner CD letztens auch, war aber nicht der selbe Brenner. Da lag es nur an Nero, einen bissel Alcohol 120% löste das Problem.

Hab die für einen Freund gebrannt der meinte geht mit Nero auf seinem Desktop PC nicht, wie gesagt wars bei meinem Läptop mit Nero nicht anders.

mfgnst

Optische Laufwerke (Blu-ray, HD DVD, DVD, CD)

Brenner LG GSA H62N hängt bei leadin

Brenner LG GSA H62N hängt bei leadin