How To Fix A Driver Power State Failure in Windows 8

Tags:
Windows 8
tomshardware
By See all their Tutorials
How Do I Fix a Driver Power State Failure in Windows 8?

"Driver Power State Failure" is an error that is displayed in Blue Screen of Death (BSOD). This error is mostly displayed due to incompatible or inappropriate driver for any hardware device that a computer system may have.

A simple restart is often all that is required to resolve the issue. If the problem still persists even after the restart, the computer must be restarted in safe mode, and the problematic device driver must be uninstalled. Since Windows 8 does not allow users to press F8 or Shift + F8 during system startup to enter the advanced boot menu by default, administrators must enable legacy advanced boot menu manually before entering the safe mode. Once Windows 8 computer is started in safe mode, the problematic driver can be uninstalled to resolve the issue.

After uninstalling the problematic driver, its new and compatible version must be installed.

Note: The exact information of a problematic device driver can be found by going through the minidump file that is automatically generated by Windows 8 when the Blue Screen of Death appears. In order to view the generated minidump file that has .DMP extension, BlueScreenView can be downloaded and executed.

How to Enable Legacy Advanced Boot Menu?

To enable legacy advanced boot menu in Windows 8, instructions given below must be followed:
  1. Restart the Windows 8 computer.
  2. Enter into the BIOS setup and configure the system to boot from CD/DVD Drive.
  3. Save the modified settings in BIOS and reboot the computer.
  4. Insert Microsoft Windows 8 bootable installation DVD into the optical media drive (CD/DVD Drive).
  5. When prompted to Press any key to boot from CD or DVD, press any key to boot the computer from DVD support.
  6. On the displayed Windows Setup box, click Next.
  7. On the next page, click Repair your computer.
  8. On Choose an option screen, click Troubleshoot.
  9. On Troubleshoot screen, click Advanced options.
  10. On Advanced options screen, click Command Prompt.
  11. On the opened command line interface (CLI), type C: and hit Enter.
  12. On C: prompt, type BCDEDIT /SET {DEFAULT} BOOTMENUPOLICY LEGACY command, and press Enter to enable legacy advanced boot menu.
  13. Once the command executed successfully, type EXIT command to close the command line interface.
  14. Back on the Choose an option screen, click Continue to restart Windows 8 computer.