1. known your parts
It is very necessary to now the different parts of a computer so here they are.
The CPU (central processing unit) is the part that carries out your instructions, and it's often just called the processor. The processor is the component that contains the microprocessor. That microprocessor is the heart of all the PC's operations, and the performance of both hardware and software rely on the processor's performance. Intel and AMD are the largest CPU manufacturers for PCs, though you'll find others on the market, too. The two common CPU architectures are 32-bit and 64-bit, and you'll find that certain software relies on this architecture distinction.
For desktop PCs, the case is typically some type of box with lights, vents, and places for attaching cables. The size of the case can vary from small tabletop units to tall towers. A larger case doesn't always imply a more powerful computer; it's what's inside that counts. PC builders design or select a case based on the type of motherboard that should fit inside.
Almost every component in your PC relies on its power supply. The power supply connects to some type of power source. In a desktop PC, you can see the power supply mounted inside the case with a power cable connection on the outside and a handful of attached cables inside. Some of these cables connect directly to the motherboard while others connect to other components like drives and fans.
Random-access memory (RAM)
Even the fastest processor needs a buffer to store information while it's being processed. The RAM is to the CPU as a counter top is to a cook: It serves as the place where the ingredients and tools you're working with wait until you need to pick up and use them. Both a fast CPU and an ample amount of RAM are necessary for a speedy PC. Each PC has a maximum amount of RAM it can handle, and slots on the motherboard indicate the type of RAM the PC requires.
A drive is a device intended to store data when it's not in use. A hard drive or solid state drive stores a PC's operating system and software, which we'll look at more closely later. This category also includes optical drives such as those used for reading and writing CD, DVD and Blu-ray media. A drive connects to the motherboard based on the type of drive controller technology it uses, including the older IDE standard and the newer SATA standard.
The more your computer processes, the more heat it generates. The CPU and other components can handle a certain amount of heat. However, if a PC isn't cooled properly, it can overheat, causing costly damage to its components and circuitry. Fans are the most common device used to cool a PC. In addition, the CPU is covered by a metallic block called a heat sink, which draws heat away from the CPU. Some serious computer users, such as gamers, sometimes have more expensive heat management solutions, like a water-cooled system, designed to deal with more intense cooling demands.
All the components we've mentioned so far are connected by some combination of cables. These cables are designed to carry data, power or both. PCs should be constructed so that the cables fold neatly within the case and do not block air flow throughout it.
Got all the part information from http://computer.howstuffworks.com/pc1.htm
2. Find the best prices
The second part of this tutorial will show you how to buy your parts at the best prices ............. Will be continued if interested check on 1/15/14