How to update the Intel Motherboard's BIOS!!!!

goku1234567890

Distinguished
So guys how are you? Hope you are fine. So to we should get started shall we.

DISCLAIMER:
First of all i want you all to know that updating the BIOS is dangerous and doing it wrong can brick your motherboard so unless the update doesn't help you in anyway don't do it otherwise i will not be responsible for the result.

PROCEDURE:
1: First of all go to the this link here and download speccy.
2: Install it and open it and on the very first page you should see basic details about your computer.
There should be be a motherboard heading with make and model you need to remember the model.
aFWQLxY.png

3: Go to the intel site put your motherboard model (remember to double check that you entered and are on the correct motherboard page) and go to the support>drivers>download and then go to the BIOS section and then click on the latest version of bios update.
4: There are gonna be 4 to 3 choices here ISO, BIO, IFLASH2, Express Update. I am going with the .BIO version file here since the other methods didn't work in my motherboard and basically this method should work on every intel motherboard.
5: After you download the file (generally it is a single file) go to this link here and carefully follow the steps to make the bootable USB or thumb drive.
6: After you done following the above guide place the download xxx.BIO file in the usb and then shut down the computer.
7: Unplug the AC power cable and open the chassis or the back cover now there should be small yellow jumper on the motherboard (it is the generally the only small thing on the whole motherboard but ask if you are not sure) make sure you remember how it is connected and then remove it.
8: Connect the USB or thumb drive on the pc and then replug the AC power cable.
9: After the Intel Logo or the splash sceen updating of the bios should automatically begin let it happen.
10: After you receive the successful update prompt let it restart and then turn it off unplug the AC power cable put the jumper back in it's position and then plug the AC power cable and your BIOS should be updated and you should be good to go.

Hope you guys got it. Over and Out.