about Intel se440BX-2

wwb123

Distinguished
Mar 10, 2003
4
0
18,510
I have a piece of Intel se440BX-2 mainboard, now I want to update my cpu from PII-350 to CeleronIII-1.1G, but I found the mainboard can't supply the 1.475voltage.
How can I do?
 

Crashman

Polypheme
Former Staff
SE440BX2 has the VRM 8.4 which means it can use the Upgradeware Slot-T. Read the blue section near the bottom of the first post, entitled "THGC Motherboards FAQ".

<font color=blue>Watts mean squat if you don't have quality!</font color=blue>
 

Crashman

Polypheme
Former Staff
LOL, did you actually read that thread? I recommend the Slot-T adapter for your board because it's much less expensive. But if you want the Powerleap adapter, go for it!

By the way, I recommend you DON'T upgrade your BIOS, as Intel has been sabataging the BIOS on this board for the last 2 or 3 revisions to kill support for higher speed processors. Why? Intel still sells motherboards, they want you to buy a P4 and board!

<font color=blue>Watts mean squat if you don't have quality!</font color=blue>
 

dhlucke

Polypheme
I second that. Don't update your bios.

<font color=red>
<A HREF="http://kevan.org/brain.cgi?dhlucke" target="_new">The French are being described as cheese-eating surrender monkeys.</A></font color=red>
 

wwb123

Distinguished
Mar 10, 2003
4
0
18,510
Thank you!
On last saturday,I'v got a 370toslot1 adapter,a 370to370 adapter, a celeronIII 1.1G. Because I'd update my bios to P17, the motherboard display a error message,recommend me to buy a cpu lower than 600Mhz,and not support PentiumIII -E or -EB. Now I konw why! I must to recover my Bios and use the adapters I have got!

<P ID="edit"><FONT SIZE=-1><EM>Edited by wwb123 on 03/11/03 10:01 PM.</EM></FONT></P>
 

Crashman

Polypheme
Former Staff
Yes, get the older BIOS installed and that message will go away. Now, you say you're using what, a Slot 1 to FC-PGA (pre Tualatin) adapter, and then a Socket 370 to Tualatin adapter on top of that? Don't you think all that adapter stacking might reduce signal strength? Why didn't you just get the danged Upgradeware Slot-T adapter from <A HREF="http://www.strattoncomputer.com" target="_new">http://www.strattoncomputer.com</A>, it only cost $20 and would have done both functions!

<font color=blue>Watts mean squat if you don't have quality!</font color=blue>
 

wwb123

Distinguished
Mar 10, 2003
4
0
18,510
Because I live in shanghai,china. I can't find the Upgradeware Slot-T adapter in shanghai pc market. So I have to use two adapter, just RMB,100yuan.

<P ID="edit"><FONT SIZE=-1><EM>Edited by wwb123 on 03/12/03 01:19 AM.</EM></FONT></P>