N-Force 2 Sound !

[davemar14]

I built a new system a few months ago and I just put in my SoundBlaster Live 5.1 card for the time being. I want to be able to use the N-Force 2 sound chip. I heard it is as good as an Audigy. But when I connect my speakers to the audio out port ( the green one) I only get sound from my left speaker. I went in under control panel and it shows that the left and right speaker are at the max setting. It is also showing a signal to the left and right speaker in the nForce Control Panel. How can I fix this? Here is my system:

AMD Athlon XP 2400+
Asus A7N8X Deluxe
Corsair 512MB DDR 400
GeForce 4 Ti 4200
Western Digital 80 GB w/8 MB
Seagate 20 GB
DVD 16/40x
Plexwriter 48x24x48
Antec 1080 AMG Case

 

[Crashman]

Make sure it's plugged in all the way? I know you probably think you did that, but sometimes the connectors are tight. Part way out gets you only one channel.

<font color=blue>Watts mean squat if you don't have quality!</font color=blue>

 

[davemar14]

I fixed it. I somehow had the connector in too far. I pulled it out a little and now it works great. Thanks a lot.