WHAT MOBO w/ NVIDIA nFORCE2 ULTRA 400 CHIPSET

[PCcashCow]

Ok,

So my Soyo KT333 is starting to short out after flashing my Bios and Installing a faulty 2600+ (266) chip. Now is limping along with raid disabled and alot of mini dumps. Long story short my ram, and new cpu test out fine along with my agp card.

So I am looking at a new mobo with the future in mind. I would like the 400 bus speed as well as the new double data ram offered by the:
Abit NF7-S
A7N8X Deluxe
GA-7NNXP
7NJS-Zenith Ultra
GA-7N400 Pro

all around 125 to 170.

My questions are my cash is low, will my 2700 ddr Samsung ram work along with my Gforce2 Ti? Or will i need to update that Hardware as well to use the chipset?

It seems that every time I reboot my wallet gets smaller. I append: No longer interested in speed, just the mere idea that everything should perform at its full potential.

 

[Scout]

Your video card will work fine. The memory should work OK too, although there has been lots of niggly problems with the nForce2 and various RAM. I have not had any problems using Kingston in my nForce2 boards... not sure about Samsung. Just give it a try!

Scout
700 Mflops in SETI!

 

[khha4113]

I've been using Samsung PC2700 with my Abit NF7-S and XP2100+ w/o problem.

Good or Bad have no meaning at all, depends on what your point of view is.

 

[Spitfire_x86]

Go for MSI K7N2 Delta-ILSR

----------------
<b><A HREF="http://geocities.com/spitfire_x86" target="_new"> My Website</A></b>

<b><A HREF="http://geocities.com/spitfire_x86/myrig.html" target="_new"> My Rig</A></b>

 

[davemar14]

I got an Asus A7N8X Deluxe board. For some reason the board would NOT reconize my GeForce 2 Ti (it could have been my card, GETTING OLD). So I went out and bought a GeForce 4 Ti 4200. Now everything is fine.