IS7-G won't boot???

[murdoK]

i have the abit IS7-G and a P4 3.0 ghz chip. also:
1 gig corsair XMS 3200PT CL2.0 (2x 512)
9700 pro
2 SATA HDD
2 cdroms

i have disconected everything but the ram and graphics card to try to get this board to work....i ahve tried different cpus and differnet ram, as well as clearing the CMOS.... this is as far as the boot gets everytime...
"CPU 1200mhz (12x100)
1024k ram tested
cpu hyperthreading detected (enabled)"

it says at bottom to press del to enter steup, but it doesnt go, but cnrt alt del still reboots, so i kno my keyboard works....even if i put a non Hyperthreading cpu in..it still says it is enabled.....tryign call abit...but not open till mon

any help appreciated!!!!!!!!

best bios error...."no keyboard detected.... press F1 to continue....."

 

[Crashman]

It sound like either a power or RAM problem. I'm guessing RAM. You need to be able to get into BIOS before the system locks and raise your RAM timing. I think someone knows a key combination that does it.

<font color=blue>Watts mean squat if you don't have quality!</font color=blue>

 

[murdoK]

i tired samsung ddr 333 ram...same error

key combo?

best bios error...."no keyboard detected.... press F1 to continue....."

 

[murdoK]

i also have a 450 watt antec power supply....so i am really stumped....

best bios error...."no keyboard detected.... press F1 to continue....."