Gigabyte GA-8KNXP

[gideonli]

Gigabyte GA-8KNXP BIOS F6
Maxtor 6Y080MO SATA HDD is operated trough port0_SB and cannot boot until remapped to IDE Pri. Master. No drivers were loaded by windows XP F6 at startup.
I would like the HDD to operate as a SATA.
Why can't I boot while SATA controller is set to SATA port0?
Where can I find these drivers on my IUCD2.4 CD?

 

[Crashman]

Simple. You boot off the XP CD and when prompted to hit F6 to load the driver, do so. There should be a driver floppy, if not you'll have to extract one from the CD.

Set BIOS to boot off CD first, then SATA.

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>

 

[svend]

go to the gigabyte website and check out the FAQ's this is answered along with the down load to fix the problem

when all is said and done, what you've done for your neighbor is most important