o\c a7n8x-e with 2500

[NUKEIT]

HELP, 2500@11X220 ON JETWAY KT600 BOOTED BUT GRAFFIX LET GO IN WINXP STARTUP PROBABLY BECAUSE THERES NO DIVIDER!. JUST GOT A7N8X-E (WAS TOLD THEY WERE THE BEST 4 O\C)AND NOW I CARNT GET OVER 2500@3200 11X200, DOES ANYONE KNOW WHATS HAPPENED OR WHY SAME BARTON WONT GO OVER 200 FSB????

2500 BARTON
A7N8X-E
DANE ELEC DDR400
256 FX5600

 

[endyen]

The north bridge and the v-regs are probably overheating. Adding voltage to ram may help, cooling to nb and vregs would do more. If you can swap for an abit NF7-S, that's your best bet.

 

[ChipDeath]

What is your Vcore set to?
If you have 2 sticks of RAM, are you trying to run it in dual channel? Not all RAM will work in dual channel mode - just being the same make & size is not always enough. Plus of course your RAM is only rated to DDR400 anyway, so you'd be doing quite well to get it to work @220Mhz without upping voltage/relaxing timings.

What is your HSF, and what sort of temperatures are you getting?

You see, more info would be nice! List as much info as you can - the golden rule when asking for help!

oh, <b>AND LOSE THE CAPS, OUR EYES AREN'T DEAF SO THERE'S NO NEED TO SHOUT!</b>

---
Epox 8RDA+ rev1.1 w/ Custom NB HS
XP1700+ @205x11 (~2.26Ghz), 1.575Vcore
2x256Mb Corsair PC3200LL 2-2-2-4
Sapphire 9800Pro 410/710