Windows configuration data corrupt and wont boot

jeremychiam

Distinguished
Feb 19, 2010
71
0
18,630
Had the comp for abt 1 month was running sweet as.

Recent week been getting non STOP BSOD and i ran chkdsk for like the for like the 3rd time and it passed no problems. restarted the computer then window 7 boots up but then a message of window 7 configuration data is corrupt, contact bla bla and u cant do anything

was wondering any1 know or experienced these problems

because of the BSODs its quite a new fresh window 7 ultimate reinstall and this still happens
 
You should first of all run a memory test program such as memtest86. If it detects memory errors in a fixed memory location every time you run the test program then it would indicate that the memory is bad, however if you get memory errors at random locations every time you run the test then the power supply is suspect. This is not a hard and fast rule but more an indication of where the fault is. If you don't get any memory errors then the power supply is still suspect and also your drivers.