Archived from groups: alt.cellular.verizon (
More info?)
In article <CkUUc.9$qr1.422@news.ntplx.net>,
Glenn <glenn@quickerfind.com> wrote:
>Never mind I found it!
>
>Menu
>073887*
>
>Use the Security code : 000000
>
>Once into the Field Test Menu, enable the Field Test mode through the menu
>item. You then have to power off and on to enter field test mode (which
>shows signal strength, gps, etc).
>
>IN ORDER TO EXIT FIELD TEST MODE:
>Press MENU then the LEFT SOFTKEY.. You then have to disable test mode (no
>need to restart).
If the software is like the T730, an easier way to enable or disable
debug mode is to enter (at the main screen), ##DEBUG (##33284) quickly,
with no pauses. Sometimes you have to try several times; the 4 does not
show if you were successful. And if it is enabled and you power off/on,
it boots to the debug screen. When enabled, MENU LEFT-SOFT-KEY turns
the debug mode on and off.