- Sep 18, 2010
- 1
- 0
- 18,510
Recently the computer just started to randomly lag, and spike in the menus, battles, building a pylon, etc etc.
Before I could play Sc2 on all ultra settings, while streaming, and not lag 60+ fps. Now it jumps from 20-50 on high-ultra, and to stop it from doing it I have to set it to all low settings.
I tried reformatting, and that didn't help at all.
Also one of the maps was distorted once when I played it, and another time stalkers "lasers" never actually visually came out shooting anything.
Also, I get the spikes in low settings as well, I'll have 200+ fps on low, but it will spike ~50 fps at a time
What do I need to try/do?
------------------
System Information
------------------
Time of this report: 9/18/2010, 14:17:12
Machine name: CHAD-8AD643HCGA
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.100216-1514)
Language: English (Regional Setting: English)
System Manufacturer: MSI
System Model: MS-7599
BIOS: Default System BIOS
Processor: AMD Phenom(tm) II X4 955 Processor, MMX, 3DNow (4 CPUs), ~3.2GHz
Memory: 3328MB RAM
Page File: 428MB used, 4783MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
---------------
Display Devices
---------------
Card name: ATI Radeon HD 5800 Series
Manufacturer: ATI Technologies Inc.
Chip type: ATI Radeon Graphics Processor (0x6899)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_6899&SUBSYS_200A1787&REV_00
Display Memory: 1024.0 MB
Current Mode: 1280 x 800 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.7111 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 8/4/2010 01:46:06, 300544 bytes
Wall of text removed.
Before I could play Sc2 on all ultra settings, while streaming, and not lag 60+ fps. Now it jumps from 20-50 on high-ultra, and to stop it from doing it I have to set it to all low settings.
I tried reformatting, and that didn't help at all.
Also one of the maps was distorted once when I played it, and another time stalkers "lasers" never actually visually came out shooting anything.
Also, I get the spikes in low settings as well, I'll have 200+ fps on low, but it will spike ~50 fps at a time
What do I need to try/do?
------------------
System Information
------------------
Time of this report: 9/18/2010, 14:17:12
Machine name: CHAD-8AD643HCGA
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.100216-1514)
Language: English (Regional Setting: English)
System Manufacturer: MSI
System Model: MS-7599
BIOS: Default System BIOS
Processor: AMD Phenom(tm) II X4 955 Processor, MMX, 3DNow (4 CPUs), ~3.2GHz
Memory: 3328MB RAM
Page File: 428MB used, 4783MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
---------------
Display Devices
---------------
Card name: ATI Radeon HD 5800 Series
Manufacturer: ATI Technologies Inc.
Chip type: ATI Radeon Graphics Processor (0x6899)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_6899&SUBSYS_200A1787&REV_00
Display Memory: 1024.0 MB
Current Mode: 1280 x 800 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.7111 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 8/4/2010 01:46:06, 300544 bytes
Wall of text removed.
Facebook
Twitter
Instagram