Good Temp monitoring software for NF4 mobos?

[addiarmadar]

I really do not think smartguard the came with my mobo is reading right. is MBM5 compat?

<i><font color=red>Only an overclocker can make a computer into a convectional oven.</i></font color=red>

 

[Guest]

suppose to be!
<A HREF="http://mbm.livewiredev.com/" target="_new">MBM5</A>

Asus P4P800DX, P4C 2.6ghz@3.25ghz, 2X512 OCZ PC4000 3-4-4-8, MSI 6800Ultra stock, 2X30gig Raid0

 

[o1die]

MBM 5.3.7.0 doesn't support some newer boards. But I used a km400 board to calibrate a newer km800 chipset board, and got accurate readings on all but the -12v. Or you can use speedfan.

 

[nkrZero]

I'm running smartguardian and MBM at the same time, the temperature seems identical to me.

Is your readings off by alot or just a few degrees?

EDIT:
Here is the thread tells how to configure MBM for NF4 lanparty board <A HREF="http://www.dfi-street.com/forum/showthread.php?t=6798&highlight=MBM" target="_new">DFI-Street</A>
<P ID="edit"><FONT SIZE=-1><EM>Edited by nkrZero on 07/28/05 09:20 PM.</EM></FONT></P>

 

[addiarmadar]

Ive tried using smartfan and MBM 5 and they all give the same reading. Could it be just the MOBO puts the CPU on high during post or maybe the bios is wrong?

There is about a 5-8c difference between BIOS and these software apps.

<i><font color=red>Only an overclocker can make a computer into a convectional oven.</i></font color=red>

 

[nkrZero]

Its always good to get the laterest BIOS. And you might be right Addiarmadar, the fan speed controller under BIOS does have different set up as its under windows.

 

[addiarmadar]

Look like IM using 2.2 but the Oskar Bios are for the SLI-D while my mobo is SLI-DR.

<i><font color=red>Only an overclocker can make a computer into a convectional oven.</i></font color=red>