1st A64 Rig - Are these settings OK?

[krazynutz]

Need some help with memory timings guys. Got myself some Geil ONE PC3200 (2X512) and had a few questions. Factory timings for the ONE series: 1.5-2-2-5

Here's what I have now:

CAS# Latency: 2 (mobo doesn't support 1.5)
Min RAS# active time: 5
RAS to CAS delay: 2
Row Precharge Time: 2

Row Cycle Time: 11
Row Refresh cyc time: 14
Read to write time: 4
Write recovery time: 3
1T/2T Memory timing: 1T

Hyper Transport - Auto (options are 1x-5x)

Should anything be different?



<font color=blue><i><b>Ride the Pig, Gir!</b></i></font color=blue>

 

[krazynutz]

Not sure why ya want it, but <A HREF="http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=85002-35" target="_new">here</A> it is.

"spd" timings were 2.5-3-3-6 2T.

Everything seems fine. In fact, I added about 3300 points to my Aquamark score just by using those tighter timings! I was wondering if I should change any of the other settings below the main four. So, any suggestions on the other timings?

<font color=blue><i><b>Ride the Pig, Gir!</b></i></font color=blue>