I've been trying to figure out what settings in the BIOS will set the AGP to 4x. The choices are manual or auto. If you choose manual you have several confusing choices (1,2, ...F). Does putting on auto automatically set it to 4x?
Set the AGP in the BIOS to auto. Then when you install the VIA 4in1 drivers in the system you select to install the AGP driver in "turbo" mode.
November 25, 2000 3:45:24 PM
Ah, ok. Thanks. I did select turbo mode when installing the 4 in 1 drivers this time. I do have the AGP set to Auto in the Bios. Now when I look at the AGP Bus information in Sisoft Sandra it still says current data transfer rate 2x (204mhz), maximum data transfer rate 4x. Does that mean its still set to 2x?