Asus CUSL2 & USB

[ruefus]

I'm installing the three extra USB ports that come with the mobo. Trouble is, there are two places on the board to connect the 10-1 pin connector. One is USB47 and the other USB56 with the differences being the voltages listed.

How do I know which connection to use? ANY thoughts would be appreciated.

 

[Guest]

I connected mine to USB47. Everything seems to be working
just fine. I guess the reason I used the USB47 connection
is because it's close to the USB2 connection. It may also
work fine with the USB56 connection, haven't tried it there though.

 

[Crashman]

I think the 47 and 56 are voltage output levels for two pins (4v/7v and 5v/6v), but since I didn't know which was standard I just used the closest one!

 

[Guest]

According to the manual, you can use both. I don't think 47 and 56 means voltage. I think it's just an enumeration: 1 and 3 are the ports on the rear, 2 is the 5-pin connector, 4 and 7 is the first 10-pin connector, and 5 and 6 is the second one.

Regards,

Bernd