Archived from groups: alt.internet.wireless (More info?)
I have a newly installed WGU624 which works great with my 802.11a Media
Extender and 802.11g computer backbone, but...
It appears that when I put my computers into suspend mode, the WGU624
"drops out" and loses communication with my computers (one is wired one
is wireless). It requires a physical electrical reset to get the
router working again properly.
Has anybody else had this problem? The netgear website indicates that
they have some minor problems in this area, but I would consider a
daily dropout everytime I suspend as more then minor. Do I simply have
a defective unit?
Archived from groups: alt.internet.wireless (More info?)
Can you get to its config page or is it totally gone? Can you ping it?
"mike1959" <mike1959.1fzwj2@no-mx.earth.universe.org> wrote in message
news:1100913295.RfMWjo1u7agUAFzIg+t9bQ@teranews...
>
> I have a newly installed WGU624 which works great with my 802.11a Media
> Extender and 802.11g computer backbone, but...
>
> It appears that when I put my computers into suspend mode, the WGU624
> "drops out" and loses communication with my computers (one is wired one
> is wireless). It requires a physical electrical reset to get the
> router working again properly.
>
> Has anybody else had this problem? The netgear website indicates that
> they have some minor problems in this area, but I would consider a
> daily dropout everytime I suspend as more then minor. Do I simply have
> a defective unit?
>
> Thanks,
> Mike
>
>
> --
> mike1959
> http://forums.speedguide.net >
Archived from groups: alt.internet.wireless (More info?)
I can ping the router and open the config page (via Explorer on my
computer which is hard wired to the 624). It simply does not allow me
to see any of the other computers on my network and the Internet (my
ISP is Comcast connected via a Cable Modem).
The Cable Modem appears to be working still, so the problem looks to be
in the router.
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.