G Guest Guest Mar 9, 2001 #1 Tried overclocking an AMDK6. Now won't boot. can't get bakc into the bios. anything i can do? no biggie,i'll just upgrade if it's gone. carlsonk
Tried overclocking an AMDK6. Now won't boot. can't get bakc into the bios. anything i can do? no biggie,i'll just upgrade if it's gone. carlsonk
G Guest Guest Mar 9, 2001 #2 Look to see if you have a CMOS clear switch/jumper. If that does not work, you may have fried something. Good luck
Look to see if you have a CMOS clear switch/jumper. If that does not work, you may have fried something. Good luck
G Guest Guest Mar 10, 2001 #3 If you cant find a reset jumber, you can try temp. removing the batery.
mpjesse Splendid Dec 31, 2007 7,214 0 25,810 Mar 10, 2001 #4 Dip it in water. Sometimes that works. This one time, at band camp... -MP Jesse "Idle time is the devil's time. Intel better start working!"
Dip it in water. Sometimes that works. This one time, at band camp... -MP Jesse "Idle time is the devil's time. Intel better start working!"
G Guest Guest Mar 10, 2001 #5 Try not overclocking at all... if it is dead and you get a new one. "Hollywood is like two elephants humping; fun to watch, but I wouldn't want to be a part of it."
Try not overclocking at all... if it is dead and you get a new one. "Hollywood is like two elephants humping; fun to watch, but I wouldn't want to be a part of it."