Vectra VLi8 Wake-on-lan and linux

Archived from groups: comp.sys.hp.hardware (More info?)

On the seventh day, Mike Jackson wrote...

> I have tried everything to get WoL working for the built-in
> 3Com 3c905B-TX Fast Etherlink XL, without success. I have enabled
> network starting in the BIOS. I have tried to modify the device's PCI
> registers directly to set the interface into S3 mode, but absolutely no
> success. I tried both the FreeBSD wol port, and Donald Becker's wol
> program to send magic packets to the machine's mac address. Nothing
> works. I am on a single subnet, with an 8-port 100Mbps D-Link switch.
>
>
> AFAIK, wol for the VLi8's was designed to be administered with "HP Top
> Tools", which was discontinued in 2002...
>
>
> Any relevant tips would be greatly appreciated.

is the 3Com card onboard or a separate PCI card? If the latter, you need a
WOL cable.

The way how it works: power on the PCs, run the shutdown -h now command, so
that the PCs will power off automatically. It is only then, that you can
wake up the PCs using standard wake-up tools.

HTH

--
mit freundlichen Grüßen/with kind regards
Christian Dürrhauer, Institute of Geography, FU Berlin

Does anyone REALLY read these stupid quotes?