Tom's Hardware > Forum > Motherboards & Memory > General Motherboard > ABIT BE6 II with IBM DTLA 307030

ABIT BE6 II with IBM DTLA 307030

Forum Motherboards & Memory : General Motherboard - ABIT BE6 II with IBM DTLA 307030

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
jonnyurso   05-17-2001 at 12:18:16 AM

I have an ABIT BE6 II with the highpoint ata 66 controller (onboard chip HPT366) and i recently bought an IBM DTLA 307030 and strangly when i boot up with my new harddrive with the highpoint controler at UDMA 4 my floppy drive stops working in dos, windows or even when i try booting from a floppy disk. My system also gets very unstable at udma66 and offen crashes.
If i connect my DTLA to the standard IDE connector at UDMA 33 (not in the highpoint controller but in the standard intel IDE controler) it all works just fine and the floppy is recognized.
My bios is the SH revision and i had a IBM DJNA 351520 working at udma66 (with the HPT366 controller) before i bought this harddrive.
Please help

Add a reply
Sponsored Links
Register or log in to remove.
Ask the community Add a reply
Tom's Hardware > Forum > Motherboards & Memory > General Motherboard > ABIT BE6 II with IBM DTLA 307030
Go to:

There are 1126 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.194 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them