Sign in with
Sign up | Sign in

Will remote controlled garage door interefere with WI-FI?

Last response: in Wireless Networking
Share
Anonymous
Wireless Authority

Archived from groups: alt.internet.wireless (More info?)

On Sun, 5 Dec 2004 16:48:10 +0000, Terrycymru <me@privacy.net> wrote:

>I have a wireless network in my home in the UK. I am now planning to
>install a remote-controlled door to my integral garage which is below the
>bedroom housing my wireless router. Is there any risk of this interfering
>with my wireless network or vice versa?

Normally, I would say no, since the frequencies of the garage door
opener (315MHz) is quite different from your wireless network
(2400MHz). However, I've seen all manner of innocuous devices produce
harmonics and garbage that will interfere with 2.4GHz. My favorite is
a cordless doorbell on 433.93MHz, that produced enough harmonic
garbage to stop my BEFW11S4v4 in its tracks for a few seconds.
Changing the channel on the BEFW11S4v4 solved that problem.

Incidentally, the interference would come from the hand held
transitter unit (key fob), and not the receiver located in the garage.
The power is so low, and the distance presumeably so far, that I
really doubt you will have a problem.


--
Jeff Liebermann jeffl@comix.santa-cruz.ca.us
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 AE6KS 831-336-2558
Anonymous
Wireless Authority

Archived from groups: alt.internet.wireless (More info?)

In news:jyazbzgcffve$.1e341nocpk2lf.dlg@40tude.net Terrycymru
<me@privacy.net> wrote:

> I have a wireless network in my home in the UK. I am now planning to
> install a remote-controlled door to my integral garage which is below
> the bedroom housing my wireless router. Is there any risk of this
> interfering with my wireless network or vice versa?

Here in the US, the radios in remote openers operate in the range of
300-400MHz, which is far away from the 2.4GHz and 5GHz where 802.11 a/b/g
operates.

But, there's always a "risk" of interference between poorly designed or
malfunctioning RF devices regardless of what frequencies they're operating
on.

Still, probably not much.

--
Bert Hyman St. Paul, MN bert@visi.com
Ask the community
!